2008 Bianchi San Jose Rear Axle
05-18-16, 12:09 PM
#1
Senior Member
Thread Starter
Join Date: Sep 2005
Posts: 169
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
2008 Bianchi San Jose Rear Axle
I have a 2008 Bianchi San Jose. Some time ago, I took the rear wheel apart to replace the bearings. The project ended up getting shelved for a period of time, and unfortunately I no longer have the axle.
Does anyone know who would've made the hub (Bianchi branded), or any ideas on an axle that would fit.
The rear spacing is 130mm, which would make the OLD 130mm and it has a fixed/free hub.
The bearings are NSK 6000-2RSS, and the "shoulder" width inside the hub shell (inside edge of the bearings) is 85~86 mm.
I found online a replacement axle for a 130mm flip/flop All City hub. Unfortunately All City can't provide the shoulder width of the axle. But, I don't really want to take a $20 gamble on if it'll work if I can help it.
Does anyone know who would've made the hub (Bianchi branded), or any ideas on an axle that would fit.
The rear spacing is 130mm, which would make the OLD 130mm and it has a fixed/free hub.
The bearings are NSK 6000-2RSS, and the "shoulder" width inside the hub shell (inside edge of the bearings) is 85~86 mm.
I found online a replacement axle for a 130mm flip/flop All City hub. Unfortunately All City can't provide the shoulder width of the axle. But, I don't really want to take a $20 gamble on if it'll work if I can help it.
