Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

What type of rack?

Search
Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

What type of rack?

Thread Tools
 
Search this Thread
 
Old 01-15-06, 01:03 PM
  #1  
Obeying Gravity
Thread Starter
 
Join Date: Oct 2004
Location: Bellingham, WA
Posts: 2,962
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
What type of rack?

I posted this in General Cycling, but no reply, so I might thought I would get an answer here...
------------
Hey all,

I'm considering getting a rear rack and panniers (if possible) but I don't know what type of rack. It would go on my 1980 Sekai Limited. I'm going to be going to UBI for 2 weeks and staying at the cycle hostel and will only have my bike, so I will have to fetch groceries every so often. All the racks I have seen like in Nashbar catalogues, look like the one below. Where it connects at the eyelet just above the dropouts, then screws into holes on the seatstays.

My bike has the eyelets above the dropouts but no holes on the seatstays... What type of rack do I need to buy?
I can post a pic of my bike if need be.

Thanks,
Matt
MattP. is offline  
Old 01-15-06, 01:47 PM
  #2  
Junior Member
 
Join Date: Jan 2006
Posts: 5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Hiya Matt, there is probably other options but from what i know there is 2 other types of racks other than the one that bolts onto the dropout and seatstay.

Firstly there is free hanging rack (designed for suspension cycles) They can also be used on non suspension bikes. They basically just clamp onto the seat post and hangs over the back wheel. Depending on how much you have left on you'r seat post and how many apples you would like carry.

Secondly, it bolts onto the dropouts as normal and then clamps onto the seat clamp istelf. Either a quick release one of a bolted one as shown..



I hope theres others who can help aswell !!
Halfordsboy is offline  
Old 01-15-06, 02:03 PM
  #3  
Infamous Member
 
chipcom's Avatar
 
Join Date: Sep 2005
Location: Ohio
Posts: 24,360

Bikes: Surly Big Dummy, Fuji World, 80ish Bianchi

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 4 Times in 3 Posts
You might try some of these:
https://www.jandd.com/detail.asp?PRODUCT_ID=FCLAMP
__________________
"Let us hope our weapons are never needed --but do not forget what the common people knew when they demanded the Bill of Rights: An armed citizenry is the first defense, the best defense, and the final defense against tyranny. If guns are outlawed, only the government will have guns. Only the police, the secret police, the military, the hired servants of our rulers. Only the government -- and a few outlaws. I intend to be among the outlaws" - Edward Abbey
chipcom is offline  
Old 01-15-06, 02:23 PM
  #4  
Senior Member
 
Grand Bois's Avatar
 
Join Date: Mar 2005
Location: Pinole, CA, USA
Posts: 17,392
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 443 Post(s)
Likes: 0
Liked 27 Times in 25 Posts
I have a Blackburn that attaches to the brake bridge. I don't know if they still make them like that. It's about 25 years old. I've used it with panniers and it's very stable.
Grand Bois is offline  
Old 01-15-06, 02:39 PM
  #5  
Obeying Gravity
Thread Starter
 
Join Date: Oct 2004
Location: Bellingham, WA
Posts: 2,962
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by chipcom
Do those go onto the seatstays?

I thought there was something like Dirtdrop was describing, but I haven't seen one. If anyone knows where one is, post a link if you will

Thanks guys
Matt
MattP. is offline  
Old 01-15-06, 02:45 PM
  #6  
Obeying Gravity
Thread Starter
 
Join Date: Oct 2004
Location: Bellingham, WA
Posts: 2,962
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by Dirtdrop
I have a Blackburn that attaches to the brake bridge. I don't know if they still make them like that. It's about 25 years old. I've used it with panniers and it's very stable.
Something like this:


I was reading about it and it says you have to be running caliper brakes, what if I am not running a rear brake, would it still work?

There is one on ebay, obviously a little old. If it works w/o a rear brake, I might bid on this and just sand and paint it.
MattP. is offline  
Old 01-15-06, 02:59 PM
  #7  
Sweetened with Splenda
 
Join Date: Sep 2003
Location: Brooklyn, Alabama
Posts: 2,335

Bikes: Too many 80s roadbikes!

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Most racks come with rubber-coated clamps like those Chipcom links for use on the seat stays of bikes without mounts on the stays. If you buy one that does not, suitable clamps are available for well under a buck at most hardware stores. I'd avoid seatpost racks - I for one rely too much on my saddle being there when I sit down to want to trust it to bear a load it wasn't designed for - and seatposts really aren't meant to take heavy horizontal loads.

edit: I'd be careful buying a used rack that shows obvious abrasions; aluminum doesn't like being bent and then re-bent.
brokenrobot is offline  
Old 01-15-06, 02:59 PM
  #8  
Infamous Member
 
chipcom's Avatar
 
Join Date: Sep 2005
Location: Ohio
Posts: 24,360

Bikes: Surly Big Dummy, Fuji World, 80ish Bianchi

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 4 Times in 3 Posts
Originally Posted by MattP.
Do those go onto the seatstays?
Yup. Put the clamps on the seatstays then attach the rack and secure with nut and bolt.
__________________
"Let us hope our weapons are never needed --but do not forget what the common people knew when they demanded the Bill of Rights: An armed citizenry is the first defense, the best defense, and the final defense against tyranny. If guns are outlawed, only the government will have guns. Only the police, the secret police, the military, the hired servants of our rulers. Only the government -- and a few outlaws. I intend to be among the outlaws" - Edward Abbey
chipcom is offline  
Old 01-15-06, 03:01 PM
  #9  
Klaatu barada nikto
 
cascade168's Avatar
 
Join Date: Sep 2004
Location: Southern NH
Posts: 1,453
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Originally Posted by chipcom
I just bought a rack recently and these clamps were included in the mounting h/w bag. I'd suggest the OP contacting the manufacturer's support (for the rack of your choice) and asking if these clamps are included.
It's a pretty common method for mounting a rear rack.
cascade168 is offline  
Old 01-15-06, 03:02 PM
  #10  
Senior Member
 
Brian's Avatar
 
Join Date: Nov 2004
Location: Between the mountains and the lake.
Posts: 16,681

Bikes: 8 bikes - one for each day of the week!

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
The seat stay clamps are easy to use. Even Jandd suggests just getting them at the hardware store.
Brian is offline  
Old 01-15-06, 03:03 PM
  #11  
Senior Member
 
Join Date: Sep 2005
Location: Michigan
Posts: 3,706

Bikes: Trek 730 (quad), 720 & 830, Bike Friday NWT, Brompton M36R & M6R, Dahon HAT060 & HT060, ...

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 840 Post(s)
Liked 336 Times in 251 Posts
Originally Posted by MattP.
My bike has the eyelets above the dropouts but no holes on the seatstays... What type of rack do I need to buy?
You can get small vinyl covered clamps at hardware stores that you could mount on seatstays in place of the braze-ons. They work fine with the racks that attach to the seatstays.
2_i is offline  
Old 01-15-06, 03:08 PM
  #12  
Senior Member
 
Nermal's Avatar
 
Join Date: Jan 2006
Location: Farmington, NM
Posts: 2,308

Bikes: Giant Cypress SX

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Liked 10 Times in 6 Posts
I've got a TOPEAK rack with detachable, snap on bag. It's a bit much to swing a leg over that bag, but it clamps to the seat post, and nothing else. Check it out in person, if you can. Different model racks come off the seat post at different angles. I recall they offer a bag model with panniers, but not certain.
__________________
Some people are like a Slinky ... not really good for anything, but you still can't help but smile when you shove them down the stairs.
Nermal is offline  
Old 01-15-06, 03:24 PM
  #13  
Obeying Gravity
Thread Starter
 
Join Date: Oct 2004
Location: Bellingham, WA
Posts: 2,962
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Wow, thanks for all the replies! I think i will order the rack I want, and if it comes with clamps yay, if it doesnt, ill just take a trip to Home Depot.

Thanks Guys!
Matt
MattP. is offline  
Old 01-15-06, 08:37 PM
  #14  
Banned.
 
Join Date: Oct 2004
Posts: 4,416
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
See if you can find a bike fom the trash. 95% of the time there will be an old rear rack bolted on theree. Or scavenge a used one from a bike shop or co-op. I have 5 old racks in my basement scrounged from wrecked and/or trash bikes.

Since you are really not touring long distances on the bike, I wouldn't even worry about strength.

I bet you could find a cheapo rear rack for ~$10 at K-mart/Walmart/Target/etc.

I don't think you have to go with a full blown pannier setup, as groceries for one person for 2 weeks really isn't that much, and even less so if you go a few times to the grocer over those 2 weeks. I bet you could manage with a backpack or mess bag if the ride is not longer than a few miles or so.

Enjoy!
BostonFixed is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.