Ultegra 6600 lever refinishing?
#1
Member
Thread Starter
Join Date: Mar 2009
Posts: 44
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Ultegra 6600 lever refinishing?
I recently picked up a 2008 Cervelo Soloist Team for my wife that had survived a shop fire. If you're interested in the condition of the bike, I posted about it here:
https://www.bikeforums.net/showthread...1#post10219121
The Ultegra levers are really the worst looking part of the bike. From what I can understand the levers are aluminum with a clear coat over the top. I was wondering if anyone in this forum had any ideas on refinishing these levers are bringing them back to life a bit. My plan will be to try some mild auto polishes to see if they will take a bit of the clear off the top and leave them looking better. Any ideas?
https://www.bikeforums.net/showthread...1#post10219121
The Ultegra levers are really the worst looking part of the bike. From what I can understand the levers are aluminum with a clear coat over the top. I was wondering if anyone in this forum had any ideas on refinishing these levers are bringing them back to life a bit. My plan will be to try some mild auto polishes to see if they will take a bit of the clear off the top and leave them looking better. Any ideas?
#2
Senior Member
Join Date: Sep 2004
Location: boston, ma
Posts: 2,896
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
just buff them. you will either take the top layer of clear off and be all set or you will need to strip all the clear coat off. either way the buffer will do it