2001 gary fisher bottom bracket size
#1
Newbie
Thread Starter
Join Date: Mar 2015
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
2001 gary fisher bottom bracket size
I have a 2001 Mamba.
https://www.bikepedia.com/quickbike/B...er&model=Mamba
I measured but does any one know what the size is? I cant find any info on it. I just wanna double check before i buy something off line.
I live in the middle of no where with no bike shops near by.
Also Good brand recommendations are welcome!
Thanks!
JP
https://www.bikepedia.com/quickbike/B...er&model=Mamba
I measured but does any one know what the size is? I cant find any info on it. I just wanna double check before i buy something off line.
I live in the middle of no where with no bike shops near by.
Also Good brand recommendations are welcome!
Thanks!
JP
#2
Senior Member
Join Date: Oct 2007
Location: West Yorkshire, United Kingdom
Posts: 5,773
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 453 Post(s)
Liked 104 Times
in
87 Posts
Measure it? You say you have done this already!, it's going to be either a 68mm or 73mm shell + the spindle length, alternatively, if you are planning on doing the work yourself (sounds like it), just remove it now, and the specs should be printed/on a sticker on the center section of the BB.
For brands, Shimano model UN26 for budget, UN54/55 for a bit better.
For brands, Shimano model UN26 for budget, UN54/55 for a bit better.
#3
Banned
So what did You measure and what was that Data?
British thread Standard by BB shell width and in a certain overall spindle length you derive by Removing it whole BB and measuring
Shimano common cartridge bearing square taper BB have a label on them to Read.
British thread Standard by BB shell width and in a certain overall spindle length you derive by Removing it whole BB and measuring
Shimano common cartridge bearing square taper BB have a label on them to Read.