Originally Posted by BluesDaddy
(Post 17131634)
ISO:
Rear Derailleur, Shimano, medium cage, Road or Mtn, needs to handle ~32T cog, XT 105 etc I'm also looking for downtube cable stops, but the clamp-on kind used with barcons/stemshifters. Or black/bronze ATB pedals. Or a Blackburn MTF-1 front rack in black. |
ISO:
100mm/110mm or 110/120mm Nitto quill stem (nitto sizing / center to center) Nitto Noodles Bar 26.8 silver setback seatpost Available for Trade: Nitto B125 - 40cm Nitto 90mm/100mm dynamic stem IRD crankset (brand new; installed and removed; with pedal threads being cross threaded) |
Still need a handful of things to finish up this beauty. Would love any help you can give!
ISO: - 36h high flange front hub in shiny-ish condition. Trying to sorta match this Sturmey hub. - 1" threaded headset. Something silver and in good shape, but doesn't need to be fancy. (LBS says I need a 30.0/26.4 but Sheldon says standard ISO should work.) - 27.2 silver seatpost, cosmetically attractive. - 38t-42t chainring, 50.4 BCD. For the inner position of a TA double. - One silver bar end plug - Nitto, V-O, or the like. - Crane brass hammer-strike bell. Could easily buy one new, but I like 'em well-worn. : ) HAVE a bunch of (mostly) early-mid 80s things: Campy pedals + Christophe clips MKS pedals+ Specialized clips Suntour Symmetric shifters Suntour Superbe calipers 36h HF Normandy Luxe rear Probably a Blackburn rear rack or two and a bunch of things I'm not remembering at the moment... Thanks! |
Originally Posted by BluesDaddy
(Post 17131634)
ISO:
Downtube cable stops for STI I have all kinds of parts for trade.
Originally Posted by truckface
(Post 17132873)
ISO:
- 27.2 silver seatpost, cosmetically attractive. - One silver bar end plug - Nitto, V-O, or the like. HAVE: a bunch of (mostly) early-mid 80s things: Campy pedals + Christophe clips MKS pedals+ Specialized clips Suntour Symmetric shifters Suntour Superbe calipers 36h HF Normandy Luxe rear Probably a Blackburn rear rack or two and a bunch of things I'm not remembering at the moment... Thanks! |
2 Attachment(s)
Have an NOS Campy 6sp freewheel, english threads 13-22 and a Park CR-2 cotter press in superb condition.
http://bikeforums.net/attachment.php...hmentid=406681http://bikeforums.net/attachment.php...hmentid=406682 ISO (1) An extremely well maintained DA7700 build kit. Primarily crankset, rear derailleur and brakes. Don't really need the brifters. (2) Campy SR 32-hole front hub (circa early 1980's, the one with the oil port) + skewer in at least very good condition. |
ISO 44-46mm drop bars. 25.3 clamp size
or 44-46mm drop bars with a quill stem that matches. |
Originally Posted by KS_rider
(Post 17135250)
Have an NOS Campy 6sp freewheel, english threads 13-22 and a Park CR-2 cotter press in superb condition.
ISO Campy SR 32-hole front hub (circa early 1980's, the one with the oil port) + skewer in at least very good condition. |
1 Attachment(s)
Originally Posted by JohnDThompson
(Post 17137049)
Do you mean the seldom seen outside of trade shows and sponsored pro teams "Super Record" hubs with the dubious titanium axles, or the more common "Record" hubs with steel axles that shipped with almost all "Super Record" groups?
http://bikeforums.net/attachment.php...hmentid=406841 |
ISO locknut for pedal spindle from an early Shimano XT PD-M730 platform pedal. Mine stripped last night taking them apart. It is relatively small in comparison to other spindle locknuts I've seen and has a fine thread. Maybe other shimano pedals have a similar system.
Have...lots of bits and bobs. Let me know if you're looking for anything in particular. |
I have for trade:
American Classic Equipment water bottle cage, it is missing one of the clamps. please see pic. If you need and can use this, cool. If you have a clamp that will work, we can work out a trade as well. As it is now...just can't use it. I also have a Deore light action top cap. I am sure someone could use the for a project. also, if you are into being super specific about restorations. here is a Cannondale BB cable clamp. says Cannondale right on 'er. Need: any touring type items, etc. Just hit me up with some trade offers. Thanks |
Chapel,
Are your bar measurements c-c or outside to outside?
Originally Posted by chapel
(Post 17136758)
ISO 44-46mm drop bars. 25.3 clamp size
or 44-46mm drop bars with a quill stem that matches. |
9 Attachment(s)
ISO: For a tandem stoker setup, 26.6 diameter seatpost with offset and ability to reverse, allowing for level saddle. Prefer SR but any considered and other ideas. Circa 1970-80's even sweeter.
(I wish to retain the captain stem but want a more forward seat position. With the tandem having an eccentric bottom bracket, I'm hoping it should work out for a wider range of fitment.) To trade, I do have an SR 26.2 diameter full offset with ability to level saddle or the SR Laprade - both depicted. Other items as well - please ask. http://bikeforums.net/attachment.php...hmentid=406962http://bikeforums.net/attachment.php...hmentid=406963http://bikeforums.net/attachment.php...hmentid=406964http://bikeforums.net/attachment.php...hmentid=406965http://bikeforums.net/attachment.php...hmentid=406966http://bikeforums.net/attachment.php...hmentid=406967http://bikeforums.net/attachment.php...hmentid=406968http://bikeforums.net/attachment.php...hmentid=406969http://bikeforums.net/attachment.php...hmentid=406970 |
Originally Posted by retrofit
(Post 17139057)
Chapel,
Are your bar measurements c-c or outside to outside? |
Originally Posted by truckface
(Post 17132873)
Still need a handful of things to finish up this beauty. Would love any help you can give!
ISO: - 36h high flange front hub in shiny-ish condition. Trying to sorta match this Sturmey hub. - 1" threaded headset. Something silver and in good shape, but doesn't need to be fancy. (LBS says I need a 30.0/26.4 but Sheldon says standard ISO should work.) - 27.2 silver seatpost, cosmetically attractive. - 38t-42t chainring, 50.4 BCD. For the inner position of a TA double. - One silver bar end plug - Nitto, V-O, or the like. - Crane brass hammer-strike bell. Could easily buy one new, but I like 'em well-worn. : ) HAVE a bunch of (mostly) early-mid 80s things: Campy pedals + Christophe clips MKS pedals+ Specialized clips Suntour Symmetric shifters Suntour Superbe calipers 36h HF Normandy Luxe rear Probably a Blackburn rear rack or two and a bunch of things I'm not remembering at the moment... Thanks! |
Originally Posted by seedsbelize
(Post 17142968)
Pm sentenced
|
ISO:
Italian thread bottom bracket, the chart says it should be a 68ss 112mm spindle, but what have you? 27.2 seat post, silver, Laprade is good. I have some stuff to trade... |
4 Attachment(s)
ISO: Vintage chain guide that mounts to seat tube. Prefer something like this Super Champion but open to suggestions:
http://bikeforums.net/attachment.php...hmentid=407259http://bikeforums.net/attachment.php...hmentid=407260http://bikeforums.net/attachment.php...hmentid=407261http://bikeforums.net/attachment.php...hmentid=407262 Let me know your needs and hopeful for trade. Thanks |
ISO: A Campy NR rear skewer, 6-speed (126mm), curved lever, with Locked and Unlocked marked on the lever.
Have: Similar but shorter, apparently for a 5-speed (120mm). It also says Campagnolo and Brev Int on the skewer nut (not the acorn), unlike any of my other Campy skewers. |
Hey guys,
ISO: 10 Speed DA Downtube Shifters (or some old ratcheting friction shifters) A Dura-Ace double crankset and bottom bracket (or a velo orange grand cru), silver, 7-9 speed Silver Cinelli 1" quill stem/ Cinelli drop bar 26.6 Cinelli seatpost, silver, will consider other brands! Have: A ton, but some highlights include 5700 105 Brifters (2X10) with 5700 Crankset/bottom bracket, 5700 RD and 5700 FD, 2 white bontrager saddles, a fox DHX 5.0 rear shock, etc.. I've got a fair amount of vintage stuff I am too lazy to compile and type, so feel free to ask. Oh and the 5700 group is the black version. Please PM me your email if interested. Happy to be back on the forums, my old account is linked to a non existent email address and I forget the password! Cheers |
ISO:
a set of brake levers (dia-compe, Shimano, something aero and 80's looking) a saddle, again something appropriate for an 80's bike. Some consumables, cables, housing, chain, bar tape, etc. I'd like to trade my Campy SR rear derailleur for these, since I'm away from my stash and this is the only trade fodder I have at the moment. PAT.83, titanium bolts. Good condition, but probably better on a rider rather than a show bike. http://s24.postimg.org/mlb069kr9/DSC_0365.jpg Dan |
Looking for shifter hoods for Ultegra 6500/6501 shifters. Just bought a Litespeed with gummy hoods that are falling apart, and they have been impossible to find online. Thanks.
Various parts for trade: tubes, 3ttt bars and quill stem. |
Try putting an ad in local CL for damaged 6500 sti. You should be able to find some pretty cheap.
|
Originally Posted by Crankykinder
(Post 17154351)
Looking for shifter hoods for Ultegra 6500/6501 shifters. Just bought a Litespeed with gummy hoods that are falling apart, and they have been impossible to find online. Thanks.
Various parts for trade: tubes, 3ttt bars and quill stem. |
There's a guy on ebay that makes them, uses a clamp, and adds the stops. They look OK on some bikes, but the older two-cable stops are available. I like the Campy ones.
Originally Posted by inkandsilver
(Post 17131885)
I have one of these in nice shape, if that floats your boat.
I'm also looking for downtube cable stops, but the clamp-on kind used with barcons/stemshifters. Or black/bronze ATB pedals. Or a Blackburn MTF-1 front rack in black. |
ISO: A complete set of modestly priced side pull brake calipers (nutted) and levers (non-aero or aero). I didn't measure when I was out in Portland last week, but probably normal reach. Something which has Campy-compatible pad holders would be great, as I have some Kool Stop Campy salmon pads to put in the holders. These are to replace a mixed set (Shimano 600 calipers and Modolo Sporting levers) which have never worked out for a bike I put together for my son.
Have: All sorts of stuff. |
All times are GMT -6. The time now is 05:43 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.