ISO and For Trade thread parts 2 and 3.
#9126
Merckx wannabe
Join Date: May 2007
Location: Zagreb, Croatia
Posts: 254
Bikes: Rampon EL/OS 5700 groupset
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
ISO: handlebar 40cm width, 26mm thick, Merckx style bend (big drop), don't care about the brand
ISO: 80s Reynolds 531 frame and fork with it, top tube C-C 54 or 53, seat tube C-T also 53 or 54, brand doesn't matter, just that it's not bent or rusted beyond salvation, cosmetics doesn't matter, actually I plan to paint it anyways...
HAVE: Suntour seatpost 26.6 thick, 16cm in lenght and 11cm marked as a maximum reach
My phone is busted so no new photos, the seat is gone, but the seatpost is stil the same, overall condition is mint except the lower part where some stupid bloke (me) tried to put it in a 26.4 tube, so a few scratches there, but perfectly functional nevertheless...
Yurop seems reasonable since I have no clue how much it would cost to send to USA from here..
ISO: 80s Reynolds 531 frame and fork with it, top tube C-C 54 or 53, seat tube C-T also 53 or 54, brand doesn't matter, just that it's not bent or rusted beyond salvation, cosmetics doesn't matter, actually I plan to paint it anyways...
HAVE: Suntour seatpost 26.6 thick, 16cm in lenght and 11cm marked as a maximum reach
My phone is busted so no new photos, the seat is gone, but the seatpost is stil the same, overall condition is mint except the lower part where some stupid bloke (me) tried to put it in a 26.4 tube, so a few scratches there, but perfectly functional nevertheless...
Yurop seems reasonable since I have no clue how much it would cost to send to USA from here..
#9127
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
I have:
Campy NR brake calipers, short reach
Shimano 105 (1055 or 1056) brake calipers, short reach
Modolo Speedy brake calipers, short reach.
I'd like to trade any of the above for the equivalent in normal reach. Where hardware etc. is missing (my NR's are missing the barrel adjusters and the shoes) or unsightly (there may be some rust issues), we could just trade the arms.
Campy NR brake calipers, short reach
Shimano 105 (1055 or 1056) brake calipers, short reach
Modolo Speedy brake calipers, short reach.
I'd like to trade any of the above for the equivalent in normal reach. Where hardware etc. is missing (my NR's are missing the barrel adjusters and the shoes) or unsightly (there may be some rust issues), we could just trade the arms.
#9128
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
I have a Ritchey Classic that should be available in about 3 weeks. Mounted once, unused. I just want to make sure I like a different stem more.
#9129
Senior Member
Still In search for this seat clamp.
Im working on this older schwinn it has one of those S seats on it.
The problem is the clamp used to keep the seat to the post is all mangled.
The person before me tightened it so tight that the teeth are totally flat so it will not grip.
I tried looking at the co-op and nothing. So Im trying you all.
the area seems to be about half a inch thick.
Im working on this older schwinn it has one of those S seats on it.
The problem is the clamp used to keep the seat to the post is all mangled.
The person before me tightened it so tight that the teeth are totally flat so it will not grip.
I tried looking at the co-op and nothing. So Im trying you all.
the area seems to be about half a inch thick.
#9130
Senior Member
Join Date: Mar 2009
Posts: 138
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Still In search for this seat clamp.
Im working on this older schwinn it has one of those S seats on it.
The problem is the clamp used to keep the seat to the post is all mangled.
The person before me tightened it so tight that the teeth are totally flat so it will not grip.
I tried looking at the co-op and nothing. So Im trying you all.
the area seems to be about half a inch thick.
Im working on this older schwinn it has one of those S seats on it.
The problem is the clamp used to keep the seat to the post is all mangled.
The person before me tightened it so tight that the teeth are totally flat so it will not grip.
I tried looking at the co-op and nothing. So Im trying you all.
the area seems to be about half a inch thick.
#9131
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,332
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
Quoted: 786 Post(s)
Liked 520 Times
in
281 Posts
ISO: Weinmann Vaiquer 750 red label center-pull brake.
ISO: pair of white carlton hoods in decent nick.
I have for trade quite a few 610s, both Weinmann and Dia Compe.
And still looking to trade a 27.2 NR seat post for a 27.0.
ISO: pair of white carlton hoods in decent nick.
I have for trade quite a few 610s, both Weinmann and Dia Compe.
And still looking to trade a 27.2 NR seat post for a 27.0.
__________________
The man who dies with the most toys…is dead. - Rootboy
The man who dies with the most toys…is dead. - Rootboy
#9132
Rustbelt Rider
Join Date: Oct 2008
Location: Canton, OH
Posts: 9,104
Bikes: 1990 Trek 1420 - 1978 Raleigh Professional - 1973 Schwinn Collegiate - 1974 Schwinn Suburban
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 261 Post(s)
Liked 372 Times
in
177 Posts
Anyone want to swap wheels? I want to try the 650b craze.
Have Mavic Open Sport laced to 9 speed Shimano 105 hubs. 700c, 130 O.L.D., Velox rim tape. Low mileage, spin true and in great condition.
ISO, 650b wheels. Prefer modern hubs if possible.
Have Mavic Open Sport laced to 9 speed Shimano 105 hubs. 700c, 130 O.L.D., Velox rim tape. Low mileage, spin true and in great condition.
ISO, 650b wheels. Prefer modern hubs if possible.
__________________
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
#9134
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,580
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 591 Post(s)
Likes: 0
Liked 663 Times
in
312 Posts
Or invest in a thread file.
#9136
On the road
Join Date: Aug 2005
Location: New England
Posts: 2,174
Bikes: Old Schwinns and old Raleighs
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 373 Post(s)
Liked 850 Times
in
325 Posts
ISO: Looking for a mens Raleigh rod brake bicycle with a full chain case, something like a DL-1, Dawn Tourist, etc. Looking for moderate or decent condition rider, no rust buckets, but need not be show quality. Send me a PM or email if you have something, pictures much appreciated.
Also would be willing to do a swap of some sort for some pre-war American antique parts.
Also would be willing to do a swap of some sort for some pre-war American antique parts.
__________________
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
Classic American and British Roadsters, Utility Bikes, and Sporting Bikes (1935-1979):
https://bikeshedva.blogspot.com/
#9137
Peace, Love, Bikes
Join Date: Sep 2006
Location: Central Ohio
Posts: 900
Bikes: Schwinn Le Tour III
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have a mid-90s (best guess) Bike Friday w/ Dual Drive hub, looking to trade for a vintage Dutch or English roadster style bike.
(Test rode a Pashley and loved it but out of the budget at this point. I have this spare BF laying around and figured I'd see if I get a bite)
(Test rode a Pashley and loved it but out of the budget at this point. I have this spare BF laying around and figured I'd see if I get a bite)
#9138
Ellensburg, WA
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 458 Times
in
160 Posts
Updated
Have:
Braze on Suntour Superbe Pro front derailleur
Suntour a3000 front and rear derailleurs - front is clamp on
Shimano LX front derailleur in good shape - 31.8 mm clamp size
Shimano center pull brakes
130 mm 1 1/8" System 2 threadless stem - silver/chrome
Suntour Pro Compe 5 spd mega range freewheel - 14-17-21-26-32. It's got something like a gold finish to it and some of that has flaked off the teeth. I can provide a photo.
Looking for:
36 or 38 t alloy 110mm chainring (Sugino would be good)
120 mm 1" silver/gray/chrome threadless stemm
********
Also:
ISO:
Avocet 02 Air 40R men's saddle
Have:
White Turbo saddle (not a reissue)
Braze on Suntour Superbe Pro front derailleur
Suntour a3000 front and rear derailleurs - front is clamp on
Shimano LX front derailleur in good shape - 31.8 mm clamp size
Shimano center pull brakes
130 mm 1 1/8" System 2 threadless stem - silver/chrome
Suntour Pro Compe 5 spd mega range freewheel - 14-17-21-26-32. It's got something like a gold finish to it and some of that has flaked off the teeth. I can provide a photo.
Looking for:
36 or 38 t alloy 110mm chainring (Sugino would be good)
120 mm 1" silver/gray/chrome threadless stemm
********
Also:
ISO:
Avocet 02 Air 40R men's saddle
Have:
White Turbo saddle (not a reissue)
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
Last edited by scozim; 09-14-12 at 10:38 AM.
#9140
Senior Member
Join Date: Feb 2009
Location: Mesa, Arizona
Posts: 559
Bikes: 90 Bridgestone MB2/3, 97 Lemond Zurich, 97 Waterford 2200, 95 Mondonico Futura Leggero
Mentioned: 0 Post(s)
Tagged: 1 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
ISO: Modern 3x9 or 2x9 MTB group. Hydraulic Disc Brakes. 29er wheels. Rock Shox Reba (straight steerer). Would consider a full donor bike.
Have: Bunch of Road Stuff. Some DA 7700, some campy. Wheels (campy 10, ultegra open pro/DA 7700 open pro). 1988 Pink Paramount FFH 54cm, Just ask.
I know this is a bit off topic, but my intended application is a Niner SIR9 frame made from 853, so at least it is steel.
Have: Bunch of Road Stuff. Some DA 7700, some campy. Wheels (campy 10, ultegra open pro/DA 7700 open pro). 1988 Pink Paramount FFH 54cm, Just ask.
I know this is a bit off topic, but my intended application is a Niner SIR9 frame made from 853, so at least it is steel.
#9142
Senior Member
Join Date: Oct 2010
Location: Minnesota- the frozen tundra
Posts: 1,946
Bikes: 1977 Raleigh Super Grand Prix, 1976 Gitane Tour de France
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
ISO, Still looking for a set of extra wide pedals as pictured below. The platform with the quill trimmed is 4 1/2 inches and is perfect for my 14 4E feet.
They're alloy MKSs and I believe they were OEM on a Raleigh or a Miyata but since they came from a friend I can't be sure.
They're alloy MKSs and I believe they were OEM on a Raleigh or a Miyata but since they came from a friend I can't be sure.
#9143
Senior Member
Join Date: Nov 2010
Posts: 3,504
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 586 Post(s)
Liked 612 Times
in
447 Posts
Have several NOS items for trade.
Stronglight 52 tooth chainring. Believe it is 122 bcd. Typical shop wear is all.
Schwinn crystal brake housing with double ended cable for brake or shifter-65" of housing. Four packs.
Phil hubs 1st generation, the ones with steel body and aluminum flanges. 32 hole front/rear. 120mm spacing. Original box too.
Dark brown suede Unicanitor (two of them). Pristine.
Other stuff I will list later.
Seeking 1st gen dura ace down tube shifters. Dura ace headset same. Brake levers 1st gen. I have some but they have road rash.
Also seeking Campy bits for my '72 Paramount. Open to anything. Thanks, pics upon request.
Stronglight 52 tooth chainring. Believe it is 122 bcd. Typical shop wear is all.
Schwinn crystal brake housing with double ended cable for brake or shifter-65" of housing. Four packs.
Phil hubs 1st generation, the ones with steel body and aluminum flanges. 32 hole front/rear. 120mm spacing. Original box too.
Dark brown suede Unicanitor (two of them). Pristine.
Other stuff I will list later.
Seeking 1st gen dura ace down tube shifters. Dura ace headset same. Brake levers 1st gen. I have some but they have road rash.
Also seeking Campy bits for my '72 Paramount. Open to anything. Thanks, pics upon request.
#9144
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
Attention Gravel Grinders, Commuters, Tourers, and Tandem Owners !!!!!!
I have a pair of uber low milage Pasela TGs tanwall in x32 I am looking to trade for a pair of similar codition/style in either x25 or 23. I have had them mounted for about 3 years but I would be suprised if they more than 150 miles on them.
I might also consider trading for VGC cantilever brakes of Deore LX quality or better w/ levers. If you have CampI cantis we can talk too.
I have a pair of uber low milage Pasela TGs tanwall in x32 I am looking to trade for a pair of similar codition/style in either x25 or 23. I have had them mounted for about 3 years but I would be suprised if they more than 150 miles on them.
I might also consider trading for VGC cantilever brakes of Deore LX quality or better w/ levers. If you have CampI cantis we can talk too.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#9145
Keener splendor
ISO, Still looking for a set of extra wide pedals as pictured below. The platform with the quill trimmed is 4 1/2 inches and is perfect for my 14 4E feet.
They're alloy MKSs and I believe they were OEM on a Raleigh or a Miyata but since they came from a friend I can't be sure.
They're alloy MKSs and I believe they were OEM on a Raleigh or a Miyata but since they came from a friend I can't be sure.
#9146
Senior Member
Join Date: Oct 2010
Location: Minnesota- the frozen tundra
Posts: 1,946
Bikes: 1977 Raleigh Super Grand Prix, 1976 Gitane Tour de France
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
.
Last edited by SteveSGP; 09-17-12 at 05:31 AM.
#9147
Unimatrix Zero
Join Date: Sep 2009
Posts: 908
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
ISO: Nitto? Mustache bars, 25.4 clamp. Any functional condition.
HAVE: Various drop bars, cinelli, sakae, 38-40cm; other parts.
PM with offers please.
HAVE: Various drop bars, cinelli, sakae, 38-40cm; other parts.
PM with offers please.
#9148
Señor Member
Join Date: Jul 2009
Location: Boston Burbs
Posts: 1,637
Bikes: Bedford, IF, Hampsten, DeSalvo, Intense Carbine 27.5, Raleigh Sports, Bianchi C.u.S.S, Soma DC Disc, Bill Boston Tandem
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Need: Dual pivot brake calipers with at least 53mm reach (Tektro 539 or 737 I believe will work or similar generics). Prefer nutted, but could drill to accept recessed.
Have: Lots of random stuff to trade, just ask.
Have: Lots of random stuff to trade, just ask.
Last edited by 4Rings6Stars; 09-17-12 at 04:18 PM.
#9150
Velophile
Join Date: Mar 2009
Location: Seattle, WA
Posts: 1,092
Bikes: See Signature.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 9 Times
in
3 Posts
Anyone need some sweet 1" Tri bars?
I have no use for them and would take just about anything as trade.
I have no use for them and would take just about anything as trade.
__________________
2009 Specialized Roubaix, 2013 Specialized Rockhopper 29er, 1996 Guerciotti PRX, 2016 Jamis Renegade Expat !
2009 Specialized Roubaix, 2013 Specialized Rockhopper 29er, 1996 Guerciotti PRX, 2016 Jamis Renegade Expat !