ISO and For Trade thread parts 2 and 3.
#7877
Senior Member
Join Date: Jun 2010
Location: South Flori-duh!
Posts: 177
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
WANT: A black turbo super saddle (beat up a bit is fine)
HAVE: white turbo super saddle (beat up a bit), san marco rolls, brooksb17, concor light '93, concor light '01
Not my picture, but here's what the Super Turbo would look like, it has the clear plastic covering on the front and rear:
HAVE: white turbo super saddle (beat up a bit), san marco rolls, brooksb17, concor light '93, concor light '01
Not my picture, but here's what the Super Turbo would look like, it has the clear plastic covering on the front and rear:
Last edited by rootbeer; 01-28-12 at 05:58 PM. Reason: forgot photos
#7878
Cisalpinist
Join Date: Jan 2011
Location: Holland
Posts: 5,557
Bikes: blue ones.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 16 Times
in
11 Posts
Want:
Campagnolo mountainbike parts. In particular brakes and levers.
Have:
-Campagnolo GS group, complete save for the BB. Can provide shimano replacement. Missing hoods and front clamp has some drillium
-complete Campagnolo Daytona group, with either a triple or a double. deraillers are for triples, but do work with the double.
-58 cm concorde prelude frame, columbus SL, light rust on the fork, heavy rust on the NDS chainstay
Campagnolo mountainbike parts. In particular brakes and levers.
Have:
-Campagnolo GS group, complete save for the BB. Can provide shimano replacement. Missing hoods and front clamp has some drillium
-complete Campagnolo Daytona group, with either a triple or a double. deraillers are for triples, but do work with the double.
-58 cm concorde prelude frame, columbus SL, light rust on the fork, heavy rust on the NDS chainstay
#7879
L-time Cat4 & proud of it
Join Date: May 2006
Location: NoVA for now
Posts: 173
Bikes: There's 4... 1 of ea
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
FT: 135mm x 1" Salsa stem. Threadless. Bought it for my 87 Rockhopper. Has LOTS of rise. (no pics till ya ask me for em)
I have a Cinelli stem 90mm x 26.4 clamp. Not pristine but not abused.
I have a couple of pairs of 600 'triangle' pedals. One has a pair of toe clips, the other doesn't. The pair that doesn't is missing an axle cover.
I have a Ti quill stem 130mm x -17. No stickers, but it looks like a Ti Eclypse.
There's more, but I'll have to go look in my bins of stuff in the garage.
Looking for a 6600 28h rear hub, a 7401-7700 28h rear hub, a black Open Pro rim (32h), a Mistral box-section rim (32h) preferably one of the 'for racing only' models, but pretty much only a box-section Mistral. ...and other stuff. Whatcha got?
M
I have a Cinelli stem 90mm x 26.4 clamp. Not pristine but not abused.
I have a couple of pairs of 600 'triangle' pedals. One has a pair of toe clips, the other doesn't. The pair that doesn't is missing an axle cover.
I have a Ti quill stem 130mm x -17. No stickers, but it looks like a Ti Eclypse.
There's more, but I'll have to go look in my bins of stuff in the garage.
Looking for a 6600 28h rear hub, a 7401-7700 28h rear hub, a black Open Pro rim (32h), a Mistral box-section rim (32h) preferably one of the 'for racing only' models, but pretty much only a box-section Mistral. ...and other stuff. Whatcha got?
M
#7880
Senior Member
Join Date: Nov 2007
Location: Medford, MA
Posts: 1,190
Bikes: Bob Jackson Super Tourer, '83 Trek 700, Gazelle Champ Mondial, Nishiki Comp II, Moto Grand Record, Peugeot UO-10 SS
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 5 Times
in
4 Posts
Have:
honey Brooks Pro, unused PENDING
lots of 80's/90's derailleurs (see list)
Yellow Jersey tubulars unused
GP4 clincher/Record hubs wheelset
Campy Chrono tubular rims 700c
GP4 tubular rims
Victory Crono tubular rims
various brake levers (Campy/Shimano SLR/Cane Creek/Dia Compe)
white Turbo saddle (good, not great condition)
Want:
black Brooks Pro or B17 PENDING
bar end shifters (Simplex would be great) PENDING
black fenders
700c touring rims or wheelset (22mm width)
SunTour or Shimano long cage RD, like Vx or Cyclone, Crane
porteur rack
honey Brooks Pro, unused PENDING
lots of 80's/90's derailleurs (see list)
Yellow Jersey tubulars unused
GP4 clincher/Record hubs wheelset
Campy Chrono tubular rims 700c
GP4 tubular rims
Victory Crono tubular rims
various brake levers (Campy/Shimano SLR/Cane Creek/Dia Compe)
white Turbo saddle (good, not great condition)
Want:
black Brooks Pro or B17 PENDING
bar end shifters (Simplex would be great) PENDING
black fenders
700c touring rims or wheelset (22mm width)
SunTour or Shimano long cage RD, like Vx or Cyclone, Crane
porteur rack
Last edited by jebensch; 02-02-12 at 03:17 PM. Reason: update info
#7881
Senior Member
Join Date: Jan 2009
Location: Ypsilanti, Michigan
Posts: 96
Bikes: 05 Bianchi Imola, 94 Bianchi Alfana, 91 Bianchi Ibex
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Have a 92 Giant Cadex 2 carbon composite frame with the aluminum fork. This is a 59 cm and is in good shape...it will need a new clear coat but the paint and decals underneath are in good condition. The lugs appear to have been painted. I bought the bike for the components. .
Last edited by mcarter; 01-30-12 at 07:39 PM.
#7882
Wookie Jesus inspires me.
Join Date: Mar 2011
Location: Seattle, WA
Posts: 2,215
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Have a 92 Giant Cadex 2 carbon composite frame with the aluminum fork. This is a 59 cm and is in good shape...it will need a new clear coat but the paint and decals underneath are in good condition. The lugs appear to have been painted. I bought the bike for the components. Price is $100. Trades are always a possibility.
#7884
Senior Member
Join Date: Jan 2009
Location: Ypsilanti, Michigan
Posts: 96
Bikes: 05 Bianchi Imola, 94 Bianchi Alfana, 91 Bianchi Ibex
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Did a cut and paste from a Craigslist ad for this item...forgot to take that part out.
#7885
Banned.
Join Date: Dec 2007
Posts: 27,199
Mentioned: 34 Post(s)
Tagged: 1 Thread(s)
Quoted: 378 Post(s)
Liked 1,410 Times
in
910 Posts
Have:
-Campagnolo C-Record Delta calipers, 5th generation, 5 pivots, great condition, great pads.
-NIB FSA dual pivot calipers, normal reach.
-Shimano 105 single-pivot calipers in excellent shape.
-3TTT Podium bars, clean, but marred on the logos, double groove. 40cm, 25.4
-Weinmann 750 centerpull nutted calipers, with straps, and an extra 610, with strap. With 4 replaced pads.
-New Shimano 8-sp DT shifters, in box. Mounted and removed in favor of 9-sp.
-NIB Veloce 8-sp hubset, 36h
-No-wear Wolber GTX2 rimset, eyelets, 36h
-White SSM Regal w/brass rivets. Low mileage, but not new. I like it, but it doesn't match anything I have, uh,....right now. PENDING
ISO:
-9/10 105 or Ultegra STI's.
-Campy Chorus/Record/Daytona/Athena dual pivot calipers.
-Campy DT Syncro inserts, B7. May negotiate on a shifter set if needed. POSSIBILITY PENDING
-7sp freewheel, not wide-range but not a corncob, either. Shimano 600 preferred, or Regina, or even Campy.
-Black racing saddle. That means small and light, not comfortable. PENDING
And as far as facilitating some other parts, found in local LBS while cleaning the attic:
27.2 Record Ti seatpost. PENDING
27.2 NIB Record aero alloy seatpost with the words around the base...
27.2 NOS Chorus aero seatpost with the engraved logo on the side...
NOS Croce d'Aune long cage RD
used but very nice Record square taper crankset, with rings, 175mm/53/39.
EDIT: I have picked these up to sell for the owner and will move them to the FS thread.
I'll still entertain trades for them...
PM's preferred.
-Campagnolo C-Record Delta calipers, 5th generation, 5 pivots, great condition, great pads.
-NIB FSA dual pivot calipers, normal reach.
-Shimano 105 single-pivot calipers in excellent shape.
-3TTT Podium bars, clean, but marred on the logos, double groove. 40cm, 25.4
-Weinmann 750 centerpull nutted calipers, with straps, and an extra 610, with strap. With 4 replaced pads.
-New Shimano 8-sp DT shifters, in box. Mounted and removed in favor of 9-sp.
-NIB Veloce 8-sp hubset, 36h
-No-wear Wolber GTX2 rimset, eyelets, 36h
-White SSM Regal w/brass rivets. Low mileage, but not new. I like it, but it doesn't match anything I have, uh,....right now. PENDING
ISO:
-9/10 105 or Ultegra STI's.
-Campy Chorus/Record/Daytona/Athena dual pivot calipers.
-Campy DT Syncro inserts, B7. May negotiate on a shifter set if needed. POSSIBILITY PENDING
-7sp freewheel, not wide-range but not a corncob, either. Shimano 600 preferred, or Regina, or even Campy.
-Black racing saddle. That means small and light, not comfortable. PENDING
And as far as facilitating some other parts, found in local LBS while cleaning the attic:
27.2 Record Ti seatpost. PENDING
27.2 NIB Record aero alloy seatpost with the words around the base...
27.2 NOS Chorus aero seatpost with the engraved logo on the side...
NOS Croce d'Aune long cage RD
used but very nice Record square taper crankset, with rings, 175mm/53/39.
EDIT: I have picked these up to sell for the owner and will move them to the FS thread.
I'll still entertain trades for them...
PM's preferred.
Last edited by RobbieTunes; 01-31-12 at 09:35 PM.
#7886
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
Seeking -
Campagnolo Electa Saddle in good shape
Campagnolo Ti Record Seatpost
Have -
multiple Brooks saddles - including white Brooks Pros (not the Tokyos) and tons of other misc. stuff. Campy aero cages and bottles come to mind.
Campagnolo Electa Saddle in good shape
Campagnolo Ti Record Seatpost
Have -
multiple Brooks saddles - including white Brooks Pros (not the Tokyos) and tons of other misc. stuff. Campy aero cages and bottles come to mind.
Last edited by KonAaron Snake; 01-30-12 at 08:11 PM.
#7890
Fat Guy on a Little Bike
Join Date: Jun 2008
Location: Philadelphia, PA
Posts: 15,944
Bikes: Two wheeled ones
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 1254 Post(s)
Liked 345 Times
in
174 Posts
Sort of...not entirely. The Electa will probably go on the Titanio, but it might go on the Marnati (depending on how much I like it)...I'm going to pull the ti record post in the Serotta to the Titanio and would like to get another to complete the Serotta.
#7894
Essentials Bike Works
Join Date: May 2011
Location: Huntington Beach, Ca.
Posts: 444
Bikes: Early 80 Celste Bianchi,Medici Pro Strada,Super Mondia,Cannondale Track Conversion
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have:
Atax stem, french diameter 22.0, not sure of the reach (120mm?) missing the mounting bolt for the clamp.
Orgin 8 horn bars, 26.0 diameter, gold anodized, about 40 cm wide
SR stem, 22.2 headtube diameter, 90mm reach
Suntour downtube shifters, nothing special but maybe some one needs them
Suntour lepree FD
Silca pump, black plastic, not sure if it works properly, just for show
Ventolux french pump, pretty beat up, does not work, just for show
Forte Gemini rear wheel, needs a cassette, out of tru
Need:
Campy FD and RD suitable for a 73' Raleigh International, NR or gran sport something like that
Campy English threaded bb (nr, record, triomphe)
Regina 6 speed freewheel
Campy NR headset piece, top race cup that is pushed in to the top of the headtube
open to other trades as well, just PM me for some pics or more info
Thanks!
-Harry
Atax stem, french diameter 22.0, not sure of the reach (120mm?) missing the mounting bolt for the clamp.
Orgin 8 horn bars, 26.0 diameter, gold anodized, about 40 cm wide
SR stem, 22.2 headtube diameter, 90mm reach
Suntour downtube shifters, nothing special but maybe some one needs them
Suntour lepree FD
Silca pump, black plastic, not sure if it works properly, just for show
Ventolux french pump, pretty beat up, does not work, just for show
Forte Gemini rear wheel, needs a cassette, out of tru
Need:
Campy FD and RD suitable for a 73' Raleigh International, NR or gran sport something like that
Campy English threaded bb (nr, record, triomphe)
Regina 6 speed freewheel
Campy NR headset piece, top race cup that is pushed in to the top of the headtube
open to other trades as well, just PM me for some pics or more info
Thanks!
-Harry
#7895
Idiot
Join Date: Oct 2011
Location: Columbia S.C.
Posts: 17
Bikes: Bianchi Nouvo Racing; Raleigh Grand Prix; Raleigh Sprint; Couple of Peugeots; EightInch Scrambler
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
ISO
shimano 600 stem, headset and pedals
HAVE
shimano 105 crankset w/ generic BB (no chainrings)
shimano 105 RD
shimano 600ex RD (non indexed)
NEW VO fenders
I have some other stuff but can't think of anything right now
shimano 600 stem, headset and pedals
HAVE
shimano 105 crankset w/ generic BB (no chainrings)
shimano 105 RD
shimano 600ex RD (non indexed)
NEW VO fenders
I have some other stuff but can't think of anything right now
#7896
Banana-tastic!
Join Date: May 2010
Posts: 1,969
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Have:
Dura Ace non-aero brake levers with hoods (hoods are a little old, but usable). Reasonably certain levers are BL-7400.
ISO:
Dura Ace aero brake levers (e.g. BL-7401, BL-7402)
I imagine that this might not be a super even trade, but I'm new to C&V and will be happy to work something out.
Dura Ace non-aero brake levers with hoods (hoods are a little old, but usable). Reasonably certain levers are BL-7400.
ISO:
Dura Ace aero brake levers (e.g. BL-7401, BL-7402)
I imagine that this might not be a super even trade, but I'm new to C&V and will be happy to work something out.
Last edited by JesusBananas; 02-01-12 at 04:12 PM.
#7897
Senior Member
So, I'm moving across the country and need to get rid of most my bike stuff. I'm not concerned about trading my stuff for stuff of the same value, I'd just like to trade for things that I need. It's going to be tight moneywise getting out there, so if I can get my bike finished using little to no actual money, that would be great.
What I need: Consumables, mostly. A set of quality brake/shifter cables and housing. If someone has a set of jagwire sitting around, that would be perfect. Some brake pads inserts for standard v-brakes, preferrable Kool-stops. SRAM or Shimano 7/8 speed chain. Possible a set of 8 speed DT shifters.
What I have: A couple quill stems, a set of quill pedals, a Campy Chorus 175 crankset, Sakae triple crankset, Dia-Compe non-areo levers with gum hoods in great shape, Shimano cantilever brakeset, a really awesome fixed/free rear wheel (Its a Suzue hub laced to a Sun Chinook rim with 48 spokes!), A Mongoose ATB chromed frame, a small Trek 800 frame (has lowrider braze-ons and would be a perfect tourer) plus some other stuff I'm sure I'm forgetting.
I'm sure some of you guys have these things sitting around your shop, how about helping a friend out?
What I need: Consumables, mostly. A set of quality brake/shifter cables and housing. If someone has a set of jagwire sitting around, that would be perfect. Some brake pads inserts for standard v-brakes, preferrable Kool-stops. SRAM or Shimano 7/8 speed chain. Possible a set of 8 speed DT shifters.
What I have: A couple quill stems, a set of quill pedals, a Campy Chorus 175 crankset, Sakae triple crankset, Dia-Compe non-areo levers with gum hoods in great shape, Shimano cantilever brakeset, a really awesome fixed/free rear wheel (Its a Suzue hub laced to a Sun Chinook rim with 48 spokes!), A Mongoose ATB chromed frame, a small Trek 800 frame (has lowrider braze-ons and would be a perfect tourer) plus some other stuff I'm sure I'm forgetting.
I'm sure some of you guys have these things sitting around your shop, how about helping a friend out?
#7898
Senior Member
ISO:
---Campy NR seatpost craddle Left Side
---Campy NR seatpost bolts (two)
---Campy NR front derailleur (braze on)
---Campy brake lever pivot bushings (C-record era thru 10 speed ergos)
---Campy Record high flange rear hub 36h or record high flange hubset 32h
---Campy Record 10 speed crankset 170 with or without chainrings.
---Lower half of a Campy SR headset
Have:
---Campy Chorus Chainring (6?7?8? speed--C-record era) 50t NOS
---Campy Record 10 Speed Ultra Drive EPS Chainring 53t (to match a 39) Taken off a new crank...never used.
---Campy Record BB cups only, Thin Cups, Italian Thread, NOS
---Campy BB spindles (2) Pista, 109mm. One world logo 70-P-120. One Shield logo 70-P-120. Both NOS
---Campy Record low flange hubset 80s 36H, well used, no skewers
---Campy Record BB New 102mm Italian thread.
---Campy Triomphe Brake Levers NOS. But some minor scratches from storage, no hoods(mostly on the bodies)
---Campy pivot pins (2) for NR/SR brake levers (NOS)
---Campy BR-RE600 brake pads (4) new in sealed box
---Campy NR/SR crankset mounting bolts (3) w/washers (used)
---One Campy orphaned crankset dust cover (so-so shape)
---Various used Campy Record 9-speed rear deraileur parts (ask and I'll see if it's still there)
---Campy Right NR seatpost cradle
---Campy Chorus 8 speed dual pivot front brake, Nice shape. I have the matching rear, but one of the arms is cracked. I'll send it with the front if it's wanted
---Campy Chorus 9 speed Ergo levers. Used. I'm second (or third) owner so I don't know their history. Logos are well worn. Left works fine. The right side has some issues. The original body cracked, so I replaced it with a 10 speed body that has touched the ground. So the body has some scrapes. It shifts fine but a little soft. I replace the g-springs, but it's still soft. These are early 9 speed levers. So, if your thinking you can change the index gear...it won't work. The gear is designed slighly different. You would have to change the gear, thumb lever, thumb lever return spring, central pivot and some washers. But as I said, It shifts and stays in gear with no problems. It's just not crisp. And for full disclosure; one of the lever pivot bushings isn't original. No tears in the hoods.
---Cinelli XA stem handlebar clamp bolt w/brass washer (used-nice)
---Cinelli bar end plugs (black or silver) I have a few sets NOS
---Benotto tape in package 3 sets (yellow, green and pink)
---Look delta cleat mounting hardware (NOS)
---One downtube braze-on boss.
---American classic seatpost hardware (clamp, plate, bolt and adjuster screw) used
---American classic seatpost top clamp w/bolt used
---Rear dropout adjusters (new) no idea of manufacturer
---Ambrosio (brass?) plate from Excellence rim w/mounting bolt. Some people call this a wheel weight.
---Proline downtube cable adjusters (missing one mounting screw) I have no idea where these are from.
---4 Taiwan made master links marked T-subpin or Tava relief (no idea where these are from either)
---Cinelli Giro D'Italia Bars Winged C logo 64-40 Used. Nice shape but some light scratches in the logo area.
---TruVativ AM Giga Pipe Team SL BB 108x70, Italian Thread. New in box.
---Concor Supercorsa Confort Saddle (off an '85 Masi) OK condition. One tear on the left butt. It looks like it touched the ground. Also, there is rust on the rails.
---Mavic 550 R.D. Hubset 32h. Rough --These are well used. They've been through two sets of rims and bearings. The bearings in them are practically new. Skewers have some rust.
---Sachs Freewheel LY 95. It was a 7speed 13-21. Due to clearence problems, I ground the 13 tooth cog into a smooth ring and epoxied it to the 14 tooth cog. So it's now a 14-21 6speed.
---Parts of a Regina America Superleggera Freewheel. It was a 13-21 6 Speed. ISO thread. All that remains is: the body, the 13,14,15, 21 cogs and the spacers that go between the missing 17,19 cogs. It's a long story so I'll spare you.
---Regina CXs Cogs: 13(C1), 15(D1), 17(A2), 18(B1), 26(A1), 28(A1). They're on the outer body of a freewheel. All Used.
---Modolo brake lever clamps (2)
---Mavic RD pulleys (jockeys, bogeys)
Ok these parts are from a French POS I stripped. They are used and filthy and dinged-up:
---Reydel plastic covered saddle dated '71
---Weinmann type 730 brakeset w/levers w/turkey wings. Levers are missing the cable cups ( I don't know what to call them) on top.
---Simplex stem shifters
---Simplex push rod Front Derailleur
---Simplex rear Derailleur
---Atax Stem 22.0 dia. 90mm
---Chromed steel seatpost. I measure 23.88mm (24mm?)
---Suntour "Perfect" freewheel 6 speed 14-18
Will send pics upon request.
If you see something you want and have something interesting to trade..it doesn't hurt to ask.
Also, if you have something I'm looking for and you're looking for something not listed...again, it doesn't hurt to ask.
---Campy NR seatpost craddle Left Side
---Campy NR seatpost bolts (two)
---Campy NR front derailleur (braze on)
---Campy brake lever pivot bushings (C-record era thru 10 speed ergos)
---Campy Record high flange rear hub 36h or record high flange hubset 32h
---Campy Record 10 speed crankset 170 with or without chainrings.
---Lower half of a Campy SR headset
Have:
---Campy Chorus Chainring (6?7?8? speed--C-record era) 50t NOS
---Campy Record 10 Speed Ultra Drive EPS Chainring 53t (to match a 39) Taken off a new crank...never used.
---Campy Record BB cups only, Thin Cups, Italian Thread, NOS
---Campy BB spindles (2) Pista, 109mm. One world logo 70-P-120. One Shield logo 70-P-120. Both NOS
---Campy Record low flange hubset 80s 36H, well used, no skewers
---Campy Record BB New 102mm Italian thread.
---Campy Triomphe Brake Levers NOS. But some minor scratches from storage, no hoods(mostly on the bodies)
---Campy pivot pins (2) for NR/SR brake levers (NOS)
---Campy BR-RE600 brake pads (4) new in sealed box
---Campy NR/SR crankset mounting bolts (3) w/washers (used)
---One Campy orphaned crankset dust cover (so-so shape)
---Various used Campy Record 9-speed rear deraileur parts (ask and I'll see if it's still there)
---Campy Right NR seatpost cradle
---Campy Chorus 8 speed dual pivot front brake, Nice shape. I have the matching rear, but one of the arms is cracked. I'll send it with the front if it's wanted
---Campy Chorus 9 speed Ergo levers. Used. I'm second (or third) owner so I don't know their history. Logos are well worn. Left works fine. The right side has some issues. The original body cracked, so I replaced it with a 10 speed body that has touched the ground. So the body has some scrapes. It shifts fine but a little soft. I replace the g-springs, but it's still soft. These are early 9 speed levers. So, if your thinking you can change the index gear...it won't work. The gear is designed slighly different. You would have to change the gear, thumb lever, thumb lever return spring, central pivot and some washers. But as I said, It shifts and stays in gear with no problems. It's just not crisp. And for full disclosure; one of the lever pivot bushings isn't original. No tears in the hoods.
---Cinelli XA stem handlebar clamp bolt w/brass washer (used-nice)
---Cinelli bar end plugs (black or silver) I have a few sets NOS
---Benotto tape in package 3 sets (yellow, green and pink)
---Look delta cleat mounting hardware (NOS)
---One downtube braze-on boss.
---American classic seatpost hardware (clamp, plate, bolt and adjuster screw) used
---American classic seatpost top clamp w/bolt used
---Rear dropout adjusters (new) no idea of manufacturer
---Ambrosio (brass?) plate from Excellence rim w/mounting bolt. Some people call this a wheel weight.
---Proline downtube cable adjusters (missing one mounting screw) I have no idea where these are from.
---4 Taiwan made master links marked T-subpin or Tava relief (no idea where these are from either)
---Cinelli Giro D'Italia Bars Winged C logo 64-40 Used. Nice shape but some light scratches in the logo area.
---TruVativ AM Giga Pipe Team SL BB 108x70, Italian Thread. New in box.
---Concor Supercorsa Confort Saddle (off an '85 Masi) OK condition. One tear on the left butt. It looks like it touched the ground. Also, there is rust on the rails.
---Mavic 550 R.D. Hubset 32h. Rough --These are well used. They've been through two sets of rims and bearings. The bearings in them are practically new. Skewers have some rust.
---Sachs Freewheel LY 95. It was a 7speed 13-21. Due to clearence problems, I ground the 13 tooth cog into a smooth ring and epoxied it to the 14 tooth cog. So it's now a 14-21 6speed.
---Parts of a Regina America Superleggera Freewheel. It was a 13-21 6 Speed. ISO thread. All that remains is: the body, the 13,14,15, 21 cogs and the spacers that go between the missing 17,19 cogs. It's a long story so I'll spare you.
---Regina CXs Cogs: 13(C1), 15(D1), 17(A2), 18(B1), 26(A1), 28(A1). They're on the outer body of a freewheel. All Used.
---Modolo brake lever clamps (2)
---Mavic RD pulleys (jockeys, bogeys)
Ok these parts are from a French POS I stripped. They are used and filthy and dinged-up:
---Reydel plastic covered saddle dated '71
---Weinmann type 730 brakeset w/levers w/turkey wings. Levers are missing the cable cups ( I don't know what to call them) on top.
---Simplex stem shifters
---Simplex push rod Front Derailleur
---Simplex rear Derailleur
---Atax Stem 22.0 dia. 90mm
---Chromed steel seatpost. I measure 23.88mm (24mm?)
---Suntour "Perfect" freewheel 6 speed 14-18
Will send pics upon request.
If you see something you want and have something interesting to trade..it doesn't hurt to ask.
Also, if you have something I'm looking for and you're looking for something not listed...again, it doesn't hurt to ask.
Last edited by gearbasher; 02-01-12 at 03:28 PM.
#7899
Senior Member
Join Date: Jan 2009
Location: Ypsilanti, Michigan
Posts: 96
Bikes: 05 Bianchi Imola, 94 Bianchi Alfana, 91 Bianchi Ibex
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Have: Suntour Top pull clamp on front derailleur from mountain bike 28.6 (excellent condition)
Shimano 600 Ultegra braze on front derailleur (good condition)
Shimano 600 Ultegra braze on front derailleur (good condition)
#7900
Senior Member
Join Date: Jan 2009
Location: Ypsilanti, Michigan
Posts: 96
Bikes: 05 Bianchi Imola, 94 Bianchi Alfana, 91 Bianchi Ibex
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Also Cateye Astrale 8 cycling computer. Great condition have everything except the cadence magnet.