ColonelJLloyd 

TugaDude, edit or delete your above post. This is a FOR TRADE thread ONLY and the moderators take it seriously.

stausty

HAVE:

Headsets:
Nuovo Record
C-Record (Athena ?)
Both English threaded



Nitto stem w/ Nashbar riser bars (will separate). Stem anodizing is flaking, but is solid.
NIP Tektro RX 4.1 levers that will go with bars, too.


Mavic MA-40 27" front wheel with Avocet QR hub


Dura-Ace 7400 hub set (36h, freewheel)
105 8s Cranks/DT shifters/RD
Nitto Dynamic II stem (90 deg, 90 mm, 25.4 mm clamp)
Nitto Olympiad bars (25.4 mm clamp, black sleeve)
An assortment of Campy DT shifter bits
Various other bits I am forgetting

WANT:
Dura-Ace 7402 brake levers and BB (and stem and steatpost?)
Stem/bars for '88 Paramount - Cinelli? Nice Nitto?
Brooks Pro
Campy dual-pivot brakes
Tektro/Cane creek/modern generic dual-pivot brakes
Modern 8s double crank/bb/RD (to convert from triple)
Anything interesting or shiny I might like

DirtyHarry714

Update

Have:

Modolo Flash Anatomic bars 26.0
Modolo TEIT Anatomic bars 26.0
Orgin 8 cowhorn bars, gold anodized 26.0
Suntour DT shifters, not sure what model, possibly cyclone
Suntour Lepree FD
Atax french stem, 22.0 x 90mm, missing clamp bolt
Sachs Maillard LY-91 7 speed threaded freewheel, (will trade this for other 5/6 speed freewheel of same or value) English threaded
MKS Sylvan road pedals
Campy Gran sport rear threaded hub
Campy 42t NR chainring
Dia compe recessed brake calipes (for parts)
Modolo Corsa quick release for calipers, also 2 original brake pads

Maybe more

Not looking for anything in particular just trying to clean out the ye olde bin

PM me

-Harry

DirtyHarry714

Would you part out one of the headsets?

I really need a top race, mine is chipped up a little bit

BluesDaddy

ISO:
Handlebar bag: Jandd, C'dale, vintage. No leather luggage.
Leather saddle: Brooks, Wrights, etc; can be aged, have patina, beat up... As long as it is solid.
Tires: 26X1-3/8 to fit Raleigh, tan sidewall
Sturmey-Archer: thrust washer & drive-side dust cover for AW

Have:
Blackburn FL-1 low rider rack, NOS, w/u-bolts for plain fork
Raleigh chain case from 1953 Superbe
Pedals Shimano quill NOS w/toe clips
Pedals Lyotard
Crank Stronglight 99 (non-drive arm extractor thread stripped)

miamijim

ISO's are OK. For instance:

ISO: Large flange Dura Ace front hub in black.

ColonelJLloyd 

Yes, I know. He deleted the post I was referencing. Thanks, TugaDude.

stausty

I would like to keep them together as they are both complete and in good shape.

balindamood

I am looking for a rear. Do you want to do halvsies if you or I find a pair at a decent price?

23skidoo

I have two small-flange fronts, and would be happy to swap one off for a rear, either small- or large-flange.

b dub 

ISO Shimano 600 Ultegra HP-6400 fork crown race (26.4mm)

mparker326

ISO - 26.0 clamp Nitto Technomic stem with 100 or greater reach.
Spoke washers - I need about 200 of these.

Have - 25.4 clamp Nitto Technomic stem with 80 mm reach, sanded down to fit a 22.0 French headset. Also works fine in standard 22.2 headset.
25.4 clamp Nitto Pearl stem with 100 mm reach
plenty of other stuff. What are you looking for?

ColonelJLloyd 

ISO:

• Campagnolo Super Record 26.6mm seatpost
• MAFAC brake shoe hardware. See parts #456E in the photo below. I need four (4) each of those parts. Some versions of the Competition had wheel guides built into the thick washer. I'm ok with either, but would certainly prefer the ones with wheel guides.

HAVE:

• Avocet 26.6 seatpost (pretty rare and cool piece; pics on request)
• Lots and lots of new and used parts; let me know what you're after

23skidoo

ISO Kusuki Winpista handlebar in excellent to mint condition.

Have lots of stuff.

boatsinbottles

ISO:
Sugino PX (170 - 175 length, please)
Sakae Low Fat pedals
Campy 8 speed RD
Nitto M-18 or VO Randonneur Rack (or similar front racks that clamp
mid-fork)
Shiny silver V-Brakes that can fit a 2.3" slick 559 (Fat Frank)
VBQ back issues (maybe)


Trade:
Suntour Cyclone short reach brakes (sorta goldish part job) with aero
levers (nifty blue hoods), nice
Specialized Bullmoose bars from '83ish Stumpjumper Sport, CrMo,
integrated cable hanger, v clean
Suntour Cyclone 52/42 double
Suntour Power Ratchet DT shifters
Suntour Power Ratchet Thumbshifters (2 pairs)
Thomson Elite stem, black, 120, 5 degrees, 25.4mm clamp, nice w/ bag
and stickers, insructrions
Cannondale handlebar bag with rack-y attachment that hooks on
handlebars and threadless stem, vintage, blue, clean
VO Tourist bars w/ free Clarks grips (dubios hardware on at least 1
Clarks lockring)
Pletscher VM front racks, NOS (in original sealed plastic), mounts on
fork crowns (2)
Various vintage drop bars
Various vintage quill stems
Scott Drop In bars

P4D 

ISO-9 or 10 speed triple group, preferably 105 or up (Ultegra would be great). 175mm crank arms are preferable. Would consider compact double but prefer triple.

Have- Shimano Ultegra 6500 9 speed group with STI, FD (clamp on), RD, brakes, 53/39 cranks with 172.5 arms. Group is in excellent condition, but with a tiny amount of use. I also have the 12-25 cassette and chain, but am intending to use unless like are included back.

RobbieTunes

ISO:
55t-56t 135 BCD chain ring.
8-sp Campy RD
8-sp Campy Ergos
8-sp era Campy calipers

Have:
an open mind,
56t Sugino ring 130 BCD
10-sp 105 FD braze-on
9-sp 105 RD short cage, polished
9-sp Ultegra crankset/BB, but only if I find the big ring in Campy
Ultegra calipers

As you can see, it's Shimano for Campy, for the most part...

noglider 

ISO: some nice 700c tires. Could be used if they're in decent shape.

HAVE: tubular wheel set. Dura Ace hubs, made for 6 speed freewheel. Campagnolo rims. Comes with tires.

thirdgenbird

campy equipped TT bike?

RobbieTunes

650c Paramount, came OEM with 56/42.
I've got the 42t...can run a 53/42 but I'm no spinner.
Looking to go 8-sp Campy on it.
It's been patient.

thirdgenbird

that is even better!

classic8tubes

looking for some hubs.
suntour superbe pro rear hub 28H 126mm
Mavic 501 front 28H

HAVE
NOS Mavic 501 rear hub 32H
Mavic 500 front 36H (used)

whatwolf

Looking for a non drive side crank arm, suntour superbe pro 165mm, or a close match.

Should look like this, but I only need the left side:


Have to trade: saddle, brake calipers, look pedals, a couple extra stems...

Junk083

I need a pair of DT shifters to mount on my Peugeot, preferably Simplex. PM me if you can help out!

eschlwc

iso: cinelli pre-90's quill (22.2mm) stem with a 65-80mm length that fits my cinelli bars with a 26.4mm clamp. looking for something either very clean or one i can polish. i have an old fiamme quill stem with a 115mm reach i'm trying to replace with a much shorter cinelli. a few other parts and valuables are also available. please email me. cheers.

edit: found (finally) on ebay