ID Peugoet 70's bike?
#1
Junior Member
Thread Starter
Join Date: May 2017
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
ID Peugoet 70's bike?
Hi all, just picked this up and have been doing some research. I think its mid 70's but beyond that im not sure. I know some of you are going to take one look and be able to give me a good idea. Thanks,
#2
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,265
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3811 Post(s)
Liked 3,338 Times
in
2,178 Posts
-----
It began life as model A08 ~1971. Lowest drop bar tenspeed model. Saddle, handlebar stem & handlebar, & rear derailleur not original. Beginning in 1972 they started coming through with NERVAR chromed steel chainguards so unless this feature removed it is unlikely to be later. Shift lever set is a model begun in 1971. Previous year they were one-piece alloy levers so it is unlikely to be earlier.
-----
It began life as model A08 ~1971. Lowest drop bar tenspeed model. Saddle, handlebar stem & handlebar, & rear derailleur not original. Beginning in 1972 they started coming through with NERVAR chromed steel chainguards so unless this feature removed it is unlikely to be later. Shift lever set is a model begun in 1971. Previous year they were one-piece alloy levers so it is unlikely to be earlier.
-----
Last edited by juvela; 05-18-17 at 02:20 PM. Reason: addition
#3
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
1970-74 Peugeot A-08 with replaced rear derailleur, handlebar, stem (brake levers, I assume) and saddle. Peugeot sold lots of these and the slightly fancier U-08 in the early 70s, and they're probably the most common French 10-speeds of the era.
#5
Mike J
Join Date: Nov 2013
Location: Jacksonville Florida
Posts: 1,588
Bikes: 1975 Peugeot PX-50L, 1971 Peugeot PX-10, 1974 Peugeot PX-8
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
The front wheel also is not original, and the crankset is missing a chrome outer guard. The rear wheel rim looks like it has a date code, am I seeing "1974" between the 2 diamond stamps? That could pin the year down.
#7
Senior Member
Join Date: Nov 2015
Posts: 4,486
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1639 Post(s)
Likes: 0
Liked 829 Times
in
538 Posts
Despite the defects noted, that bike looks to be in pretty good condition, otherwise. It looks practically new in some areas on your pics. It would make a very nice commuter re-build.
Many more years and miles still left on that bike!
Many more years and miles still left on that bike!
#8
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
#9
What??? Only 2 wheels?
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,434
Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10
Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times
in
232 Posts
Understand that with decent alloy wheel and whatever other alloy parts you feel like buying to replace steel, that frame will make a nice riding bike. Not the lightest in the world but not so stupid heavy either.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
#10
Junior Member
Thread Starter
Join Date: May 2017
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have an idea for this bike....
I have a fixed gear panasonic tourist that was one of the 1st bikes I bought. The frame is too small for me and I didn't realize it when I installed an eigthinch fixed gear conversion kit. This peugoet is the perfect size for me and I was thinking of swapping the components. I dont see any problems except the bottom bracket (which was included with the kit along with crank arms). I have heard of universal bottom brackets but I think this one threaded in. I could be mistaken as its been a few years.
Anyone want to offer their .02 before I go tearing everything apart? Thanks,
I have a fixed gear panasonic tourist that was one of the 1st bikes I bought. The frame is too small for me and I didn't realize it when I installed an eigthinch fixed gear conversion kit. This peugoet is the perfect size for me and I was thinking of swapping the components. I dont see any problems except the bottom bracket (which was included with the kit along with crank arms). I have heard of universal bottom brackets but I think this one threaded in. I could be mistaken as its been a few years.
Anyone want to offer their .02 before I go tearing everything apart? Thanks,
#11
Mike J
Join Date: Nov 2013
Location: Jacksonville Florida
Posts: 1,588
Bikes: 1975 Peugeot PX-50L, 1971 Peugeot PX-10, 1974 Peugeot PX-8
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
I have an idea for this bike....
I dont see any problems except the bottom bracket (which was included with the kit along with crank arms). I have heard of universal bottom brackets but I think this one threaded in. I could be mistaken as its been a few years.
Anyone want to offer their .02 before I go tearing everything apart? Thanks,
I dont see any problems except the bottom bracket (which was included with the kit along with crank arms). I have heard of universal bottom brackets but I think this one threaded in. I could be mistaken as its been a few years.
Anyone want to offer their .02 before I go tearing everything apart? Thanks,
#12
Junior Member
Thread Starter
Join Date: May 2017
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The fixed gear frame I currently have is too small. Thats why I want to swap the nice parts off of it.
I have to ask jj1091, since you have a px10 and a u08, is the px really that much better?
I have to ask jj1091, since you have a px10 and a u08, is the px really that much better?
#13
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,798
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,325 Times
in
837 Posts
Having owned a PKN-10 (successor to the PR-10, and right below the PX-10) and two UO-8s, I can safely attest that the PX-10 is much more desirable than the UO-8. Having said that, I also note that any decent plain gauge steel sport touring frame can be a surprisingly pleasant ride, assuming it is equipped with aluminum rims.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#14
Member
Join Date: May 2017
Location: Maine
Posts: 35
Bikes: Ciocc World 77, '80s Ciocc, Olmo built Eurospeciale, '50s Express Werke, PX10e, Reynolds Gitane, Fuji Team, plus the parts bike heap
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
And yes, the PX10 is a whole lot better than the UO8 or AO8.
I rode a lot of miles on a UO8 and it really didn't suck that much, but I would personally not give one space on my property today. I'd look for a good home though and give it away or sell it if it was really clean.
If I had no bike I'd bring one home if it fit. FWIW.
I have a PX10 carcass I used to ride in NYC, and even bought a French BB to fix it back up. And a pretty nice vintage Stronglight crank. Five years ago...
#15
Mike J
Join Date: Nov 2013
Location: Jacksonville Florida
Posts: 1,588
Bikes: 1975 Peugeot PX-50L, 1971 Peugeot PX-10, 1974 Peugeot PX-8
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
But, I'm not gonna lie, I didn't get the PX-10 for utility reasons. It's sort of like owning an old Porsche, love to tinker with it and shine it up and look at it, too. It's a work of art.
Thread
Thread Starter
Forum
Replies
Last Post
marius.suiram
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
12
06-17-19 08:04 AM
zammykoo
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
9
07-12-17 09:58 AM