LED Technology and the Dinotte 500L
#1
Scoop
Thread Starter
Join Date: May 2005
Location: It's not just a place, it's a state of mind
Posts: 18
Bikes: Lemond Croix de Fer; Santa Cruz Superlight; 1989 Cannondale single-speed conversion; Raleigh "Crackbike conversion"
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
LED Technology and the Dinotte 500L
After some resistance over the price, I recently purchased the new Dinotte 500L. Before I start let me say I'm cheap and rarely buy into the cutting edge of technology. There are risks, such as premium pricing to support development costs and possible issues with product reliability, so it is better to wait a bit before embracing something new. But this time I needed a new light to replace my ailing Cygolite, which started working erratically in its second winter season. I commute yearround now and I'm doing a 24 hour mountain bike race this summer, so I had to buy something and I wanted a bright light to cover both uses (I also recently purchased a 3W Black Diamond headlamp for night skiing, so was intrigued by the new power of LED technology). I've had it out on a handful of test rides now and here are some initial reactions:
- It's clear to me LED technology has surpassed halogen and HID lights. The new Dinotte setup, while expensive now, offers a bright light with great coverage, versatile lighting adjustability, light batteries and decent runtimes. If it also proves durable, then a light like this is to me much more desirable than a HID. Some HIDs may be brighter but the overall cost coupled with bulb replacement costs is a showstopper. There are mighty good halogen options out there for half this price, but the light power, quality and battey runtimes all offset against going halogen.
- Unlike my old light, this product throws a broad beam that lights up what is in front of me and throws light out diagonally, lighting up the distance of turns. I'm impressed with the beam pattern for use both on and off road. In fact, I think I can use this light alone for night trail riding - even the race - but am doing some more testing on this front. (I do plan to attach the 3W spotlight mentioned above to my helmet for use in clutch situations, but I don't think I need anything more).
- The light is well-designed for commuting. I really like the flashing mode because it will deliver flashing bursts of light for dusk/dawn riding. The light also has three power settings, so you can set it to the conditions. Full power is more than enough for any road riding and may not be necessary in many conditions.
- The light comes with everything one needs for both road and off-road use. Mounts for bars and helmet and 2 batteries, which is enough to get through a team 24 hour race without visiting a charging station. The batteries are also light enough that one can carry them both while commuting, so there's a backup power source at all times. Or conversely one battery can be charged while the other is in use if you are forgetful like me.
- It's clear to me LED technology has surpassed halogen and HID lights. The new Dinotte setup, while expensive now, offers a bright light with great coverage, versatile lighting adjustability, light batteries and decent runtimes. If it also proves durable, then a light like this is to me much more desirable than a HID. Some HIDs may be brighter but the overall cost coupled with bulb replacement costs is a showstopper. There are mighty good halogen options out there for half this price, but the light power, quality and battey runtimes all offset against going halogen.
- Unlike my old light, this product throws a broad beam that lights up what is in front of me and throws light out diagonally, lighting up the distance of turns. I'm impressed with the beam pattern for use both on and off road. In fact, I think I can use this light alone for night trail riding - even the race - but am doing some more testing on this front. (I do plan to attach the 3W spotlight mentioned above to my helmet for use in clutch situations, but I don't think I need anything more).
- The light is well-designed for commuting. I really like the flashing mode because it will deliver flashing bursts of light for dusk/dawn riding. The light also has three power settings, so you can set it to the conditions. Full power is more than enough for any road riding and may not be necessary in many conditions.
- The light comes with everything one needs for both road and off-road use. Mounts for bars and helmet and 2 batteries, which is enough to get through a team 24 hour race without visiting a charging station. The batteries are also light enough that one can carry them both while commuting, so there's a backup power source at all times. Or conversely one battery can be charged while the other is in use if you are forgetful like me.
#2
eternalvoyage
Join Date: Feb 2007
Posts: 2,256
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the review. I would be interested in hearing any other experiences or observations.
***
LEDs do seem like the way to go. There are so many options, it can be hard to sort them all out. The LED bike lights at princetontec.com look good to me.
There are probably some other good LED lights out there that I haven't even seen yet. If anyone knows of others that look good, I'd be interested in hearing about them, and checking out the websites and specs.
***
LEDs do seem like the way to go. There are so many options, it can be hard to sort them all out. The LED bike lights at princetontec.com look good to me.
There are probably some other good LED lights out there that I haven't even seen yet. If anyone knows of others that look good, I'd be interested in hearing about them, and checking out the websites and specs.
#3
Member
Join Date: Jan 2007
Posts: 48
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hiles, here's a great recent review of LED light options https://www.gearreview.com/2007_led_lights.php
Last edited by DucVDuc; 04-19-07 at 06:51 PM.
#4
Cat None
Join Date: Aug 2005
Location: San Diego
Posts: 4,508
Bikes: LOOK KG 461, LeMond Zurich, Giant Talon 29er 0
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by DucVDuc
Hiles, here's a great recent review of LED light options https://www.gearreview.com/2007_led_lights.php
Last edited by SDRider; 04-19-07 at 10:33 PM.
#5
eternalvoyage
Join Date: Feb 2007
Posts: 2,256
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by DucVDuc
a great recent review of LED light options https://www.gearreview.com/2007_led_lights.php
#6
3 seconds
Join Date: Sep 2006
Location: Chicago, NW burbs
Posts: 2,935
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have the Dinotte 3W helmet light and it's great as a helmet light. But, I don't think any LED's are up to my ARC yet. Why didn't they show the ARC (or other top notch HID) for comparison?
#7
Recumbent Evangelist
Join Date: Mar 2005
Location: Kitchener, Ontario
Posts: 2,991
Bikes: Rebel Cycles Trike, Trek 7500FX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
$500 for an LED light is still way too rich for my blood. I'll take a $150 HID that throws out more light, thankyouverymuch!
#8
Señior Member
Join Date: Sep 2005
Location: Michigan
Posts: 13,749
Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
Overall cost plus replacement cost is a showstopper for HID, but $500 for an LED light isn't?
I've got a TrailTech HID that I love. New, with LiIon lightweight battery and smart charger is $200. Replacement bulbs are $85. I'm going on 2 years and it's just as bright as it was when new, so I don't know what the $ per year is going to work out to.
The LED in the Dinotte isn't going to last forever either. High intensity LEDs have a limited lifespan (OK, ALL LEDs have a limited lifespan, but the low intensity ones are in tens of years)
It's great to know that LEDs are coming that can really do the job. I'd RATHER have an LED than an HID, but until someone's putting one out that's as bright as an HID and no more expensive, I'll stick with my HID.
I've got a TrailTech HID that I love. New, with LiIon lightweight battery and smart charger is $200. Replacement bulbs are $85. I'm going on 2 years and it's just as bright as it was when new, so I don't know what the $ per year is going to work out to.
The LED in the Dinotte isn't going to last forever either. High intensity LEDs have a limited lifespan (OK, ALL LEDs have a limited lifespan, but the low intensity ones are in tens of years)
It's great to know that LEDs are coming that can really do the job. I'd RATHER have an LED than an HID, but until someone's putting one out that's as bright as an HID and no more expensive, I'll stick with my HID.
__________________
Work: the 8 hours that separates bike rides.
Work: the 8 hours that separates bike rides.
#10
3 seconds
Join Date: Sep 2006
Location: Chicago, NW burbs
Posts: 2,935
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by rajit
#11
Cyclist
Join Date: Apr 2005
Location: Oregon
Posts: 265
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by rajit
This review is somewhat obsolete now due to the recent arrival of the 830 lumen Lupine Wilma series.
Rajit
Rajit
To my knowledge, none of the other lights have changed. In fact, the only difference is the output of the Wilma. Oh, well, time and technology marches on.
#12
Señior Member
Join Date: Sep 2005
Location: Michigan
Posts: 13,749
Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
HID still wins for me, because I just ain't paying that kind of cash for a headlight, and the HID is already so bright that I've gotten complaints from drivers when I had the thing pointed at the ground. If the light I have had a setting for twice as bright, I wouldn't use it. I can replace this HID for < $200. I'll be happy to go LED when the price gets down into that range AND my HID dies.
__________________
Work: the 8 hours that separates bike rides.
Work: the 8 hours that separates bike rides.
#13
-
The Lupine Wilma is obsolete.
https://www.lumiledsfuture.com/produc....cfm?lineId=19
The Rebel in cool white is rated at up to 145 lumens at 3.9v/1w from an emitter that is less than 3mm x 5mm.
You could mount 6 of these in an area of 1 cubic centimeter (less area than a single K2 emmiter), producing 870 lumens (seems like a lot of heat to manage - gonna have to mount a liquid CO2 cartridge / regulator unit next to the battery).
Rebel emitters cost $2.50 eack in bulk, so that 870 lumens would cost $15.
Lupine's next generation light will probably use these, and they'll manage to add another $600 onto the price.
It does look like the end of HID is now in sight.
That little dot next to the end of a AAA battery is the Rebel emitter. I'll need smaller fingers and bigger eyes to solder that...
https://www.lumiledsfuture.com/produc....cfm?lineId=19
The Rebel in cool white is rated at up to 145 lumens at 3.9v/1w from an emitter that is less than 3mm x 5mm.
You could mount 6 of these in an area of 1 cubic centimeter (less area than a single K2 emmiter), producing 870 lumens (seems like a lot of heat to manage - gonna have to mount a liquid CO2 cartridge / regulator unit next to the battery).
Rebel emitters cost $2.50 eack in bulk, so that 870 lumens would cost $15.
Lupine's next generation light will probably use these, and they'll manage to add another $600 onto the price.
It does look like the end of HID is now in sight.
That little dot next to the end of a AAA battery is the Rebel emitter. I'll need smaller fingers and bigger eyes to solder that...
#14
Señior Member
Join Date: Sep 2005
Location: Michigan
Posts: 13,749
Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
Originally Posted by seeker333
Rebel emitters cost $2.50 eack in bulk, so that 870 lumens would cost $15.
Lupine's next generation light will probably use these, and they'll manage to add another $600 onto the price.
It does look like the end of HID is now in sight.
Lupine's next generation light will probably use these, and they'll manage to add another $600 onto the price.
It does look like the end of HID is now in sight.
There simply isn't any reason any LED light should cost $500. Even the highest power emitter is still just a few bucks in quantity, and apart from that it's pretty basic standard electronics and an aluminum case.
__________________
Work: the 8 hours that separates bike rides.
Work: the 8 hours that separates bike rides.
#15
Banned
Join Date: Nov 2004
Posts: 10,082
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by ItsJustMe
Yeah, as soon as some company that's not selling to the boutique market comes out with one priced reasonably. That is, maybe parts plus 100%? That would put a decently constructed model in the $100 range in retail. I'm assuming here that the body will have to be aluminum for heat dissipation, so the unit costs maybe $20 to build, package and put into distribution, then the various markups take it to $100 (I don't think that would be an unusual markup).
There simply isn't any reason any LED light should cost $500. Even the highest power emitter is still just a few bucks in quantity, and apart from that it's pretty basic standard electronics and an aluminum case.
There simply isn't any reason any LED light should cost $500. Even the highest power emitter is still just a few bucks in quantity, and apart from that it's pretty basic standard electronics and an aluminum case.
#16
Burn-em Upus Icephaltus
Join Date: Oct 2002
Posts: 2,357
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Liked 0 Times
in
0 Posts
Originally Posted by rajit
__________________
Sick BubbleGum
Sick BubbleGum
#17
Senior Member
Join Date: Jun 2003
Posts: 18,138
Bikes: 2 many
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1266 Post(s)
Liked 323 Times
in
169 Posts
Originally Posted by seeker333
The Lupine Wilma is obsolete.
That's just the begining of the list.
Originally Posted by ItsJustMe
There simply isn't any reason any LED light should cost $500. Even the highest power emitter is still just a few bucks in quantity, and apart from that it's pretty basic standard electronics and an aluminum case.
You need to talk to someone who understands business, so they can tell you how a world wide sales distribution works. Is your labor for free? Do you have medical insurance? Did you include mark up for the distributors in other countries? What about a retailer, are they going to sell something with no profit for the retail shop? Don't go into bussiness selling lights.
Originally Posted by Gojohnnygo.
I'm all for LED lights but I need to see comparison shots before I change over from my L+M HID to LED. Remember any light company can say what they want about lumens output,candle power or even comparable to 40 watt halogen lights
Lupine does not exagerate they don't have to. The beam photos show this. So does owning a Lupine light. They are probably the best bike lights made in the world. They are lighter, brighter, have better batteries, chargers, etc.
#18
Burn-em Upus Icephaltus
Join Date: Oct 2002
Posts: 2,357
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Liked 0 Times
in
0 Posts
Originally Posted by 2manybikes
The beam comparison photos for the Wilma compared to HID were posted on the forum some time ago.
Lupine does not exagerate they don't have to. The beam photos show this. So does owning a Lupine light. They are probably the best bike lights made in the world. They are lighter, brighter, have better batteries, chargers, etc.
Lupine does not exagerate they don't have to. The beam photos show this. So does owning a Lupine light. They are probably the best bike lights made in the world. They are lighter, brighter, have better batteries, chargers, etc.
__________________
Sick BubbleGum
Sick BubbleGum
#19
Senior Member
Join Date: Jun 2003
Posts: 18,138
Bikes: 2 many
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1266 Post(s)
Liked 323 Times
in
169 Posts
Originally Posted by Gojohnnygo.
Do you know what thread that is. I have not seen them and would like to.
It was almost the same as my 900 lumen Lupine HID. The beam shape might even be better for riding.
I'll try and find it.
Edit post: I found this in the Lupine Forum, it's exactly what you want.
https://www.lupine-lights.com/phpBB/viewtopic.php?t=1155
Last edited by 2manybikes; 04-22-07 at 08:59 AM.
#21
Señior Member
Join Date: Sep 2005
Location: Michigan
Posts: 13,749
Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
Originally Posted by Ziemas
Don't forget the cost of the battery and charger. Batteries can be quite expensive.
Really, as far as I can tell, the real advantage of LED over HID is durability over long periods of time. HID is actually more efficient in lumens per watt than high output LEDs, but LEDs are going to last longer. Also LED doesn't need quite the circuitry that HID does.
__________________
Work: the 8 hours that separates bike rides.
Work: the 8 hours that separates bike rides.
#22
Senior Member
Join Date: Jul 2005
Posts: 171
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
While it's true that HIDs used to be more efficient than LEDs, that is no longer the case.
A Seoul P4 (U bin) will give you 200+ lumen output at 3.7 Watts.
A Seoul P4 (U bin) will give you 200+ lumen output at 3.7 Watts.
#23
Senior Member
Join Date: Jun 2003
Posts: 18,138
Bikes: 2 many
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1266 Post(s)
Liked 323 Times
in
169 Posts
Originally Posted by Big Tommy C
While it's true that HIDs used to be more efficient than LEDs, that is no longer the case.
A Seoul P4 (U bin) will give you 200+ lumen output at 3.7 Watts.
A Seoul P4 (U bin) will give you 200+ lumen output at 3.7 Watts.
If my math is correct 200 lumens divided by 3.7 watts is .......................54.05 lumens per watt.
My 900 lumen HID is 16 watts. that works out to .................................56.25 lumens per watt.
#24
Senior Member
Join Date: Jul 2005
Posts: 171
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Well, I think it's really something like 190 to 230 lumen, depending on how things go in the "bin lottery".
Plus when you run them at lower power it approaches 100 lumen/watt (at 1 watt).
That's something I love about LEDs: They are more efficient when you run them at lower power. They are very dimmable, can be made to flash, run basically forever, and don't cost $80 to replace because a bulb burns out/shatters.
As soon as the more mainstream light companies pick up on the Cree XR-Es and the Seoul P4s, I don't think there will be any reason to go HID.
Plus when you run them at lower power it approaches 100 lumen/watt (at 1 watt).
That's something I love about LEDs: They are more efficient when you run them at lower power. They are very dimmable, can be made to flash, run basically forever, and don't cost $80 to replace because a bulb burns out/shatters.
As soon as the more mainstream light companies pick up on the Cree XR-Es and the Seoul P4s, I don't think there will be any reason to go HID.
#25
Senior Member
Join Date: May 2006
Location: North of the 49th Parallel (GPS grid soon)
Posts: 1,766
Bikes: MTB Peugoet Canyon (forgot the model), Nikishi? roadbike, MTB custom build,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by jeff-o
$500 for an LED light is still way too rich for my blood. I'll take a $150 HID that throws out more light, thankyouverymuch!
Yah I agree $500 is too rich for my blood. One of my old highschool mates is into LED's and just bought some K2's and a CREE for his motorbike but I plan on working with him for a bike version. He's a programmer so the LED thing is just on the side but I really hope to have the lights in prototype testing in a couple months.
This is the best looking DIY. Very nice looking and low profile as well for the helmet and bar mount. https://myfwyc.org/bikeled/DIY_LED_Bi...ing_Guide.html
Last edited by Zero_Enigma; 04-22-07 at 10:24 PM.