Originally Posted by
Homer & G
I think I was able to get it to work fine on a Trek Madone 4.7(58-cm). The main body is tilted quite a bit toward the crank to get the correct gap and the adjustable wheel sensor is opened up toward the wheel, but it's not all the way out (jic... you did notice that the wheel sensor arm is adjustable?). My assumption is that since the auto wheel size calculator registered a number after my first ride that the speed sensor is working. I'll try it sometime with the gps switched off just to confirm.
Ron
Ron,
Thanks for the help. Yes, I have attempted to tilt the body of the sensor toward the crank. However, doing so causes the adjustable wheel sensor arm to only be closer to the spokes, not farther away from them. I have also kept the position of the sensor body in one position while attempting to adjust the sensor arm by loosening the screw, positioning it optimally, then retightening the screw.
At the moment, I'm repositioning the sensor body by moving it closer toward the seat post, thereby requiring me to move the crank magnet and spoke magnet closer toward the wheel rim. Hopefully, doing so will allow it to work better.
Anthony