Originally Posted by
bentbaggerlen
The only way to know is to try, Im sure one of the shops around you has a BOB, or some one that works in the shop has one. The Santana BOB has a quick release and BOB fork that fits a rear hub with a 160mm spacing, so it wont work with your hubs 132- 135 mm spacing. Ive used the BOB behind all my bents, but none have the Tour EZ's rear seat braces, but I think it would fit. If you needed you could use the tandem hub BOB quick release at 145mm hub spacing, with some spacers it would give you more room between the seat brace and the BOB fork
Thanks for the input. I'm going to look at a Yak tomorrow. It has the Santana skewer and fork. I'll most likely discover that the Santana set-up is too wide which is O.K. because I intend to buy a "28" fork anyway. The "28" fork will give me the versatility to use the trailer with any of my bikes, the 26" ers and the 700's. I'll just trim the skewer length down to the best usable width for my TE and gradually buy skewers to convert the rest of the fleet to "Tow ready" status.