So I eventually picked up a set of cheap CXP33's with Formula hubs for my U-08 conversion. The back one fitted fine, but the front hub didn't. The Axel was too narrow and the fork slightly narrowed than the hub.

I opened up the fork slightly and then instead of using a flat file to open up the axel space, I just taped the hub in with a rubber mallet, which seemed to work fine. However the wheel is not slightly off center in the fork. I mean it spins fine, but it's slightly off which I'm guessing could be a problem with the brakes (which reach to 700c fine luckily). Any tips on what I did wrong and how to fix?