Originally Posted by
hauk
I opened up the fork slightly and then instead of using a flat file to open up the axel space, I just taped the hub in with a rubber mallet, which seemed to work fine. However the wheel is not slightly off center in the fork. I mean it spins fine, but it's slightly off which I'm guessing could be a problem with the brakes (which reach to 700c fine luckily). Any tips on what I did wrong and how to fix?
Probably, you can center the wheel in the fork by just loosening the axle nuts and pushing the wheel sideways in the fork until it is centered, then re-tightening the axle nuts.