Originally Posted by
gbalke
Jon,
What you may consider trying is to remove the fender, it over, and see if you can carefully press the small tab tighted to the fender. Another appraoch would be to carefully remove the nose piece, fill the cavity with waded up masking tape, sticky side down, and reinstall. The tape should hold it to the fender. It doesn't take much tape, just enough so it does not show.
I put a glob of silicone under mine and it has stayed quiet ever since.
FWIW I use oil on the finish of mine to keep them cleaned up and from rusting. I use 90w gear oil and coat the frame and fenders heavily, then wipe off. Only thing I do for maintenance is to wiped the whole biked down occasionally with an oily rag. It coats the rust spots and keeps them from getting worse.
Aaron
