The four photos are all of the rear mudguard. The first photo is of the front outside, the second is the front inside, the third is the read inside, and the fourth is the rear outside.

Electricity enters through the connector at the front, and exits to the rear light via the connector at the rear. Between the connectors, the electricity is conducted along one of the aluminum strips in the mud guard. The ground passes from the rear light through the center aluminum strip of the fender to where the fender is attached to the bike frame at the front of the fender.

IMG_0123..jpgIMG_0122..jpgIMG_0121..jpgIMG_0120..jpg