[History]
So, time comes to replace my DA chainrings and I'm too cheap to buy DA again..I've had problems in the past with FSA chainrings doing this but have read some other things about FSA finally fixing the problem so I go for the chainrings that are less than half the price.

[The Equipment]
Quarq Cinqo Crankset
10spd FSA Road S10 53/39 http://www.excelsports.com/new.asp?p...jor=1&minor=12
Ultegra 6700 FD
DA 7800 10SPD Chain

[The Problem]
Chain drops BETWEEN the chainrings while pedaling.

[I've Tried:]
I don't even know what to try aside from making the push or pull of the FD so extreme that the chain is likely to drop inside/outside of the small/big chainrings (respectively). The other option is to lap brand new chainrings, no thanks.


[Picture]
2010-05-22 09.31.17..jpg
You can see the teeth not catching the chain in the picture.



[Other Info]
Maybe I don't have the chainrings on correctly but I doubt it. The small one's text is visible from the NDS of the bike and the shoulders are facing the NDS (to allow the bolts to sit flush). Logo is facing out.

I've never had this problem with SRAM Red, Shimano DA, Ultegra, or 105 chainrings or adjusting the FD for these chainrings.