Originally Posted by
mrrabbit
At 32 Hole 3-cross I get 292.50mm / 293.38 which rounds out to 292mm and 293mm.
At 36 Hole 3-cross I get 288.97mm / 289.86 which rounds out to 289mm and 290mm.
Those would work with 12mm nipples and probably be borderline okay with 14mm nipples...
What were your measurements?
=8-)
I got the same figures for the 32H and rounded up to 293mm and 294mm. Nipples are DT 12mm. I'll attempt to measure ERD tomorrow on a virgin rim using the DT nipples. The bit about measuring spoke length from the inside of the bend should be fine as long as the spoke length calculators determine spoke length from the periphery of the spoke hole in the hub to the ERD dimension rather than from the center of the hole. I expect they do because the hub's spoke hole diameter is a driving dimension.