Thread: brass brazing
View Single Post
Old 10-25-10 | 03:48 PM
  #26  
Live Wire
Framebuilder
 
Joined: Dec 2007
Posts: 570
Likes: 0
Originally Posted by Silverbraze
Mitred for 54cm frame

Spirit 31.7 TT .5/.38.5 = 168 g
Spirit 38mm DT .5/.38/.5 = 220 g
Spirit 28.6 ST .6/.38/.5 = 166 g
Total main tubes = 554 g
(the original .5mm CS tubes were removed from sale, did not meet with success in the real world, failures etc)

Mitred for 54cm
Life 31.7 TT .65/.4/.65 = 206 g
Life 38 DT .65/.45/.65 = 264 g
Life 28.6 ST .75/.4/.6 = 189 g
Total main tubes = 668 g
Gotchya- like I said in post #13, I don't use the stuff because I don't build any road specific, light-duty/race-only bikes.

Still, the shaped Spirit has been/still is used effectively by others- and while the OP clearly isn't ready, I wouldn't disparage a builder with the design and fab skills to utilize those tubes appropriately.

Last edited by Live Wire; 10-25-10 at 05:46 PM.
Live Wire is offline  
Reply