Originally Posted by
waterrockets
1st off, this is a BRILLIANT lacing pattern. This is essentially what Fulcrum does with all their wheels (1/2 spoke NDS). It will be stronger than a traditionally laced 24h wheel, and I'd wager it's right up with a 28h wheel because of the benefits of having equal spoke tensions on both sides. I really really really like this lacing pattern.
Hi there. I was Googling for info on how to lace a wheel like this, just a regular hub (drilled 8/16 though) and this thread is about all I found. I would be using a Gipiemme/Cannondale Tecno hub from eBay and a Sun Venus rim. I use spocalc and I am not sure how to get accurate spoke lengths for lacing like this. If the non-drive side is radial, that is easy but if it is 1x then I'm not sure about it either. I assume that it is more complicated than using the 32 spoke lengths for the drive side and 16 spoke lengths for the non-drive side...
Thanks, Doug
P.S. I would have tried a PM with more details, but I can't send them...