Originally Posted by
mainstreetexile
Thanks everybody. I was actually hoping they would be 130 because i'm hoping to fit them on a 120 touring frame (that i would have to cold set) or a 126 road frame. Seems like a safe bet that they would be 135 and require cold setting the frame either way.
Doesn't matter one bit if it's 130 or 135mm. It can be configured any way you want. Here's a picture of a similar hub from that era:
See that silver 5mm spacer/washer on the left side of the axle? That's added to the hub to make a 135mm spacing. If you remove it, you end up with 130mm spacing (a 30-second procedure). Of course, you'll need to chop the axle and re-dish the wheel, but that's another 5-10 minutes max.
Most likely it's coming from a road-bike with 130mm spacing, so you probably won't have to do anything.