Old Fat Guy;12083360]You need a spacer on the drive side, and a wheel redish.

I figured I would need a redish. The problem I have with spacers is that I don't have enough axle to work with. I was just looking around and found a 141 MM axle w Campy threads at Harris Cyclery. That would give me enough axle to move things around or add spacers, but might be close to being too much axle to fit between the dropouts. I guess if worse came to worse, I could grind off a MM or two. With the existing 134 MM axle, I just don't have enough room to do much, and still have a little axle to go into the dropouts. Am I on the right track with this idea? Do you know of a source of Campy axles? In the perfect world, I would find a 10MMx137 MM x 26 TPI axle. Harris only has that length in a 9.5 MM diameter. Thanks for the advice.