Here is the lockring/outer race... clean this as you did the other parts.


Now lay a nice bead of grease on the inner freewheel race as I have.


Next place all the balls in the bed of grease as pictured.....


Next place the freewheel body slowly into the freewheel making sure not to disturb any of the balls (do this slowly)...

Freewheel body is now back in place, and it's time to turn the freewheel over to finish things up. Turn it over slowly holding the body and freewheel together so no balls can fall out.


Here the freewheel is now turned over and ready to accept some grease.


Again lay a bead of grease on the outer race of the freewheel.


Now place all the ball bearings in the bed of grease like you did on the other side.


Now place the lockring/outer race on the freewheel body.


Now that the lockring is in place tighten in (counter clockwise) using your spanner or punch.


Your freewheel is now ready to be installed on your wheel and taken for a long ride....

I hope you all enjoy this, and if you have any questions please let me know...... ENJOY!!