Originally Posted by yopappamon

When you get your new controller, you will want to make sure the hall wires match colors, the motor wires match colors, I would recommend using the ebrakes, the throttle colors might need a little decoding (looks like red to red, white to white, blue to black). The little jumper connector on the Infineon controllers is a speed limiter for Europe. Limits your speed to around 14mph when the jumper is connected. Full speed when not connected. The LED"s on the throttle won't work. But they really only would work with SLA's, since LIFEPO4's don't sag voltage as they discharge, the led's will just read full all the time.

If you start it up and the wheel kogs or shutters, them most likely the hall connections aren't matching the wire phasing. Should would out of the box with most hubs, but if not you have to try different combinations.