Thread: schwinn speedster
View Single Post
Old 02-22-11 | 07:15 PM
  #3  
Jeff Wills's Avatar
Jeff Wills
Insane Bicycle Mechanic
Titanium Club Membership
Sheldon Brown Memorial - Titanium
15 Anniversary
 
Joined: Mar 2008
Posts: 10,163
Likes: 1,128
From: other Vancouver
Originally Posted by bikeman715
Are you asking about how to put the master link together ? if so put the chain around the chainring (the front gear ) and around the rear gear (on the wheel ) , take the master link with the pins thou the backside of the two open link of chain ,put on the cover link (the one with two holes in it ) on it and press on the chip and you good to go.
That's if the master link is the clip-style. Most of the Schwinn 1/8" wide chains (generic for 1-speeds and 3-speeds) used a master link that needs to be sprung sideways to install the plate.

Of course, the first question should be: how did you get the chain off in the first place?
__________________
Jeff Wills

Comcast nuked my web page. It will return soon..
Jeff Wills is offline  
Reply
0