Today I started the upgrade from my old Shimano XT triple components to my new SRAM XO 2X10 group. My bike is a 2009 Ellsworth Epiphany.

I carefully removed the XT BB just now using my Park BBT-19 tool (I triple checked before I started to make certain I did not turn it the wrong way) and was a bit shocked to find metal shavings on the BB.



The cranks were spinning freely with no drag or weird noises and the crank shaft is clean with no marks or damage that I can see.
The BB bearings also spin smoothly (the outside bearing shell is a tad dirty in the photo above though).

Inside the frame BB there is one spot that almost looks like it could be wear although I think it may be from when they machined the threads into the BB.
The other issue is the dark area inside the frame BB.
There are no threads where the dark (anodized) area is, and the dark threads along side of it are very shallow, obviously machined incorrectly at the factory.
Is this a problem and/or will it be a problem when installing the new Truvativ GXP BB?
All of the other threads appear to be perfect.

Do you think the metal shavings were just left inside the frame from machining at the factory?

Thanks for your help.