View Single Post
Old 03-27-11 | 11:06 PM
  #1192  
Sixty Fiver's Avatar
Sixty Fiver
Bicycle Repair Man !!!
 
Joined: Sep 2007
Posts: 27,266
Likes: 150
From: YEG

Bikes: See my sig...

Originally Posted by gecho
I was periodically getting a ping / clunk noise when the freehub engaged during yesterday afternoon's ride home, so I took the bike in for a complementary spring tune up and to have the freehub looked at. The same guy changed his tune saying there is probably nothing wrong with it, but if there was they'd have to send the part to Shimano for verification before they'd warranty it. If they don't find anything wrong with it, I'll just flush it out this weekend and use some cold weather grease. It doesn't look like a very difficult job.

It seems odd that bike manufacturers like Trek in this case, don't offer comprehensive warranties on their bikes. If you have to go to each individual component maker for warranty issues, you might as well just build the bike yourself.

The other LBS in town is more of family afair and much more friendly. Any one of their mechanics probably has more years experience than the majority of the other shop combined does. Basically I'm saying the other shop is full of old guys .

For the commute this morning I got off to slow start. I forget to take the lighting off the other bike, so I had to dig out and install my ancient (15 year old) rear flasher and rode without a headlight. I've had headwinds in the morning all week long.
Sometimes the friendly old guys know a little more about these things and some of them ride all winter so know what you are talking about.

Servicing the freehub is not that hard and it is probably a matter of replacing the stock grease with synthetic as this will not freeze up on you when it gets cold... the only time the freehub on my extra bike has ever gotten cranky was at -46C.

For winter riding Shimano's silent clutch hubs are wonderful as they have no pawls and are resistant to the most extreme temperatures.
Sixty Fiver is offline  
Reply