Originally Posted by
colleen c
That holder should work. However it looks like the under voltage on the PCB needs to be reset after you installed battery. That being said, if a cell jiggle loose or you try to swap with fresh battery while out riding, the pack may need to be reset with a charger. I also think that you might have to reset it if you are planning to remove the cell out of the holder and charging the cell with an external charger bay.
Crud.. that puts a kink in my plans. I wonder if I should just look for one that holds a bunch of NiMh AAs. But all of these would have the PCB I would imagine. The idea of the PCB is to keep from killing individual cells, right?