Thread: Threading on hubs?
View Single Post
Old 05-17-11 | 03:38 PM
  #7  
FastJake's Avatar
FastJake
Constant tinkerer
 
Joined: May 2010
Posts: 8,040
Likes: 156
From: Madison, WI
Originally Posted by Steev
The most common by far is ISO, 1.375"x24TPI. It will be what's on your hub.
+1

You can mount a freewheel on either side of your hub. But you can only put a fixed cog on the fixed side because that's the side that has provisions for a lockring.
FastJake is offline  
Reply
0