Hi all. I've been popping too many spokes on my rear wheel to feel confident in it for this upcoming winter's commute. After pulling the wheel off and putting a couple hours into inspecting and truing the wheel, I've decided to just replace it. It's seen enough mileage and a few winters so it's pretty corroded.

So, after some research, I've decided on this wheelset and a spacer so I can continue to use my current 7-speed cassette, but I want to make sure that what I'm buying will actually work with my bike and that I didn't miss anything important. The best I can tell, the rims are 20mm interior width, which is what I want, but that info is actually from this page for the Alex y2000 rims so I'm not sure.

Dimension 700C Formula 135mm Rear Hub, Alex X2000 Rim
Spacer

EDIT: Turns out it was actually not a cassette but a freewheel/freehub. FYI