Originally Posted by
fietsbob
in the next year they will start offering a taller M bar , set-up, called H.
next , perhaps an S bar , adding 30mm to upper and lower sections
of the steering mast.
in the meantime, perhaps a modification of the s bar , with a MTB riser bar,
may be good,
you could get a different sweep angle as well .. ,
and there is Brompton's Saddle Adapter Pin , It fits on the top of the seatpost,
and allows an even further forward saddle position.
Thanks for the answer. I probably can move the saddle enough with the original edition so to speak. Plus with the M-bar I can lean it a bit towards me and a bit to high is better than a bit to low. Oh decisions decisions...
Well I can always save up some money and buy the other stem if the one I decide on doesn't work.
Originally Posted by kamtsa
Apropos Brompton mods, I recently replace the hinge plates with these ones
http://brompfication.com/17-hinge-clamp-plate.html
One of the edges is longer than the other which prevents the plate to turn when folded. Makes the unfolding slightly easier.
Oh, nice ones. Maybe in the future. First get the bike. Then get the mods.