Originally Posted by
illiterateabc
That's unfortunately not possible; the other end of the bolt appears to be inseparable from the hinge it's connected to. The only way to remove the bolt would be to remove the entire hinge lever. I took the bike in to Performance and got them to order the part. We'll see how the installation goes.
At the far end of the upper link in the photo there appears to be a clevis pin with a retaining ring on one end. If that's the case, it'd be a simple matter to remove the retaining ring, the pin, and free up the link to be able to rotate the bolt. That pin could also be cut and removed and then replaced with a bolt and stop-nut.