Originally Posted by
Andrew R Stewart
I don't see evidence of overheating and the areas that are filled look to be fully filled. Again a good first. Cut this open and confirm the internal fill rate then have another go. Andy.
I agree with everything that Andy said, but this is the most important part. Looks like you are pretty close. You are going to hate yourself if you don't get your shorelines cleaner with the torch. Since you seem to have heat control down fairly well, you should be able to have time to see where there are gobs of filler and move them somewhere that they will not require you to file them.
Cut it up and see how you did with penetration. You will eventually know if you got full penetration, but until then, it's good to check occasionally.