Originally Posted by
miamijim
The fork race is .05mm smaller than the fork, I think that's well within proper tolerance. The frame cups are .05mm bigger than the frame, I think that's well within tolerance as well.
Correct. These parts are press-fits, folks!
The Spec. is:
"Crown race seat should be 0.025 to 0.05 mm larger than the crown race itself."
"Inside the head tube should be 0.025 to 0.1 mm smaller than the pressed race."
Edit: that .008" is indeed 0.2 mm, a bit much, almost certainly due to new plating. That should be refaced/re-cut with a Campy tool or equivalent....