Jinished the bike early in the week. Had all the graphics made local from artwork I generated using photos of origonals except the fork tube badge. That is a temp I made with vinyl layers. I am looking to have the badge made with 3-D printing. Made a few runs to adjust cables and a trip around the naborhood. Parked the bike after a fast down hill test run Thursday was closing up the shop when BOOM!!! Did the 1 second shakie dance when the rear tyre blew. I am taking these Kendas off. 90psi tyre was at 85psi. Ordered a pair of Gaterbacks.
The bike new
http://i1168.photobucket.com/albums/...jos/doi005.jpg
Near finished
http://i1168.photobucket.com/albums/...jos/doi016.jpg
Massive sprocket
http://i1168.photobucket.com/albums/...jos/doi019.jpg
The graphics
http://i1168.photobucket.com/albums/...jos/doi022.jpg
Temp nose badge
http://i1168.photobucket.com/albums/...jos/doi020.jpg