you need an overall axle length of about 160mm. 120 over the locknuts + 2x8mm for the thickness of the dropouts, +2x12mm for the nuts and washers. Slightly longer is OK too, but check the specs for the over-lucknut-distance (OLD) because hat's the key.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.