View Single Post
Old 09-30-12 | 10:23 AM
  #9230  
RobbieTunes
Banned.
 
Joined: Dec 2007
Posts: 27,199
Likes: 1,462
Have:
Red Look Carbon "delta" pedals, nice shape.
Red Look Carbon "delta" pedals, nice shape. Yes, a 2nd set.
Grey Shimano 7401 pedals, Look "delta" compatible.
Pewter Shimano 1056 pedals, Look "delta" compatible.
Campagnolo Centaur FD, 31.8 clamp.
Shimano Ultegra 6500 crankset, good shape, with English 5500 BB.
75mm Kalloy stem, 25.4 clamp, but much taller, like a Technomic. Looks like an SR stem
25.4 3TTT Podium bars, the type with no sleeve, 40cm c-c
25.4 Sakae Champion bars, with sleeve, 39cm c-c
120mm Bianchi quill stem, 25.4 clamp, the hollow by ITM, labeled Bianchi, polished w/black letters.
180mm Record crank arms, scuffed from use, with 9-sp rings made for Record arms.
8-sp Chorus rear hub. Nice shape. I'd have to count the holes, pretty sure 32h.
1 pr Hutchison Equinox 700x23 tires, red stripe, 140 miles, excellent condition (swapped in Vredesteins)
1 Conti Ultra Sport 700x23, nearly new-I don't have a match
1 Vittorio Rubino 700x23, black, used-I don't have a match
3x650c tubes
Black Kalloy 27.2 seatpost, about 240mm long, never cut.
White Selle Italia Anatomic saddle, has a cut on top, includes a repair kit.
Weinmann black label 750 pair of center-pull calipers, with stirrup and 105 pads.
Weinmann black label 610 center-pull caliper, with stirrup, no pads.


ISO:
Seatpost binder bolt, Sugino or Campy are fine,
Seatpost binder bolt, Sugino or Campy are fine, yes, a 2nd one.
Dual pivot calipers, black preferred, almost any brand, would consider 1050 Shimano, maybe.
Cinelli 66-42/40 or 64-42/40 bars
3-prong gear puller, 3.5" to 4"
Campy insert required to remove Power Torque cranksets.
Black Look "delta" pedals, or compatible. Not the old school versions.
White Look "delta" pedals or compatible. Not the old school versions.

Last edited by RobbieTunes; 09-30-12 at 05:01 PM.
RobbieTunes is offline