Originally Posted by
PartsMan
I just made what I thought would look good on the bike/rack.
I think it is 9x16" on the outside.
Wouldn't hold a case. 18 can pack might fit.
I am just taking a soft bag with work clothes and lunch.
Still brainstorming on mounting.
on one bike with a similar rack I took two pieces of wood that were 3/8 thick and about an inch wide and the same length as the width of the crate. then I drilled two matching holes per mounting wood and used a carriage bolt and wing nut so I could take it off easily and put the crate on different bikes. I found out that the wing nuts came loose easily and now have it secured with nylocks on two bolts through the flat rack in the picture. I will be interested to see what you come up with.