Originally Posted by
kevmk81
Couple quick questions:
First, I'm assuming that it shouldn't be ridden in this shape?
Second, which tools do I need to use to get to the bearings? I've looked at Park Tools website and this is what I'm finding, but not sure if I really need all of these to get to the bearings:
BBT-30.3
HHP-2 or HHP-3
Or, do I not need any of those at all? I'm able to remove the non-drive side crank easily, but didn't want to go any further than that last night, not wanting to screw anything else up.
Thanks for the help!
If it is a new bike take it to a dealer. All my BB30 noises came under load, never like that video. Must be bad bearings as it sounds like a playing card in the spokes. Off to the shop you go.
DYI tools from Park are not cheap, about $100.00 if I remember. I bought a press and removal tool here on BF about a year ago. Haven't had to use them yet. You could do it cheaper but don't mess it up. That won't be covered by the warranty if you do.