Please ignore, as the previous post answered this... I just didn't see it in time...
Originally Posted by
mrrabbit
First, redo the drive side spacing such that the distance from the freewheel stop to the end of the lock nut is 40.5mm. 41mm is okay. Then, finish off the non-drive spacing so that you have an OLD of 134-136mm. (This is assuming your rear spacing is supposed to be 135mm). Then re-dish the rear wheel - i.e., center the rim between the ends of the lock using a dishing tool to check... =8-)
Mr R; I don't think I have seen that spec before... Seems like it would be useful to a lot of folks posting here.
Could you also provide that spec for the other variations? I am thinking about a formerly 7spd Shimano hub wanting a SRAM 11-34 9speed cassette, as that is my current issue at hand (apologies for being self-centerer), but the spec for any or everything you happen to have knowledge of would likely be very welcome.
Thanks (and apologies for being so tardy in reading this thread).
/K