Originally Posted by
ksisler
Please ignore, as the previous post answered this... I just didn't see it in time...
Mr R; I don't think I have seen that spec before... Seems like it would be useful to a lot of folks posting here.
Could you also provide that spec for the other variations? I am thinking about a formerly 7spd Shimano hub wanting a SRAM 11-34 9speed cassette, as that is my current issue at hand (apologies for being self-centerer), but the spec for any or everything you happen to have knowledge of would likely be very welcome.
Thanks (and apologies for being so tardy in reading this thread).
/K
If the current freehub is a 7-speed setup, you'll have to change the freehub - if available - and swap in a 8/9/10 freehub along with a slight spacer/locknut change on the drive side as well.
Splined 7-speed freehub bodies and narrower than splined 8/9/10 freehub bodies and both are complemented with differing size axle-end finishing lengths.
Non-drive side is used to finish out the desired OLD spec.
=8-)
__________________
5000+ wheels built since 1984...
Disclaimer:
1. I do not claim to be an expert in bicycle mechanics despite my experience.
2. I like anyone will comment in other areas.
3. I do not own the preexisting concepts of DISH and ERD.
4. I will provide information as I always have to others that I believe will help them protect themselves from unscrupulous mechanics.
5. My all time favorite book is:
Kahane, Howard. Logic and Contemporary Rhetoric: The Use of Reason in Everyday Life