I really like my 1980 Moto Grand Jubilee but this bike really seems to push all the right buttons. I realize it's not in the same league but tell me what you think. I was considering putting some straight bars to use as my around town bike, and at $389 it seems like a steel, pun intended. Of course it would be a larger size to fit me like my Moto.

Martin






[TABLE="width: 640"]
[TR]
[TD="width: 124"]Frame[/TD]
[TD="width: 472"]Mercier Custom Double Butted and Tapered Reynolds 520 Cromoly with Track Dropout, Externally butted seat tube, 31.8mm top tube (vertically ovalised near seat tube), 120mm Dropout spacing, Rack brazeons, Fender eyes
Note: Frames do not have Headtube decals. Saddle is all black with pressure relief cut-out[/TD]
[/TR]
[TR]
[TD="width: 124"]Fork[/TD]
[TD="width: 472"]Mercier Custom Drawn Butted and Tapered 4130 Cromoly 1 inch steerer with custom brazed flat crown[/TD]
[/TR]
[TR]
[TD="width: 124"]Headset[/TD]
[TD="width: 472"]Threadless 1"[/TD]
[/TR]
[TR]
[TD="width: 124"]Crankset[/TD]
[TD="width: 472"]TruVativ Touro aluminum arms, 130 BCD, 48T PowerSpline
(please tighten and check prior to every ride)[/TD]
[/TR]
[TR]
[TD="width: 124"]Bottom Bracket[/TD]
[TD="width: 472"]108mm Truvativ PowerSpline[/TD]
[/TR]
[TR]
[TD="width: 124"]Pedals[/TD]
[TD="width: 472"]Traditional clip and strap
(please grease and tighten pedals prior to every ride)[/TD]
[/TR]
[TR]
[TD="width: 124"]Front Derailleur[/TD]
[TD="width: 472"]N/A[/TD]
[/TR]
[TR]
[TD="width: 124"]Rear Derailleur[/TD]
[TD="width: 472"]N/A[/TD]
[/TR]
[TR]
[TD="width: 124"]Shifters[/TD]
[TD="width: 472"]N/A[/TD]
[/TR]
[TR]
[TD="width: 124"]Cog[/TD]
[TD="width: 472"]16T Fixed Gear (rear hub has fixed gear cog on one side, you can put your own single speed freewheel on the other side)
Please check/tighten your lockring prior to prior to every ride[/TD]
[/TR]
[TR]
[TD="width: 124"]Chain[/TD]
[TD="width: 472"]KMC Z410 (1/8 or 3/32 NoChoice)[/TD]
[/TR]
[TR]
[TD="width: 124"]Hubs[/TD]
[TD="width: 472"]TrackSpec High Flange Aluminum, contact sealed cage ball bearings, 120mm rear spacing[/TD]
[/TR]
[TR]
[TD="width: 124"]Spokes[/TD]
[TD="width: 472"]Stainless[/TD]
[/TR]
[TR]
[TD="width: 124"]Rims[/TD]
[TD="width: 472"]36H Aluminum Aero Section Track DoubleWall[/TD]
[/TR]
[TR]
[TD="width: 124"]Tires[/TD]
[TD="width: 472"]Kenda K191 700x23c high pressure road (please maintain at least 100psi)[/TD]
[/TR]
[TR]
[TD="width: 124"]Brakes[/TD]
[TD="width: 472"]N/A (+FREE Front/Rear Brakes for limited time, while supplies last)[/TD]
[/TR]
[TR]
[TD="width: 124"]Brake Levers[/TD]
[TD="width: 472"]N/A (+FREE Crosstop Brake Levers for limited time, while supplies last)[/TD]
[/TR]
[TR]
[TD="width: 124"]Handlebar[/TD]
[TD="width: 472"]Butted 6061 Aluminum Road (Standard clamp 26.0mm, not oversized)[/TD]
[/TR]
[TR]
[TD="width: 124"]Stem[/TD]
[TD="width: 472"]Forged Aluminum, O degree, Removable Clamp, Silver Finish, Threadless 1"[/TD]
[/TR]
[TR]
[TD="width: 124"]Tape/Grip[/TD]
[TD="width: 472"]Deluxe Cork[/TD]
[/TR]
[TR]
[TD="width: 124"]Saddle[/TD]
[TD="width: 472"]Mercier Kilo TT Edition, SLR Style Racing, pressure relief cut-out, CroMo Rail
Note: Saddle is all black with pressure relief cut-out[/TD]
[/TR]
[TR]
[TD="width: 124"]Seat Post[/TD]
[TD="width: 472"]SL Micro Adjust Aluminum 250mm x 26.8mm[/TD]
[/TR]
[TR]
[TD="width: 124"]Seat Clamp[/TD]
[TD="width: 472"]Mercier SL Machined Aluminum (max torque 6 Newton Meters)[/TD]
[/TR]
[TR]
[TD="width: 124"]Sizes[/TD]
[TD="width: 472"]47cm, 50cm, 53cm, 55cm, 57cm, 60cm, 63cm
Geometry link is at: http://www.cyclesmercier.com/geometry_tt.html
Some sizes are available for pre-payment to ship later as noted[/TD]
[/TR]
[TR]
[TD="width: 124"]Plating[/TD]
[TD="width: 472"]Chrome PlatedGallery of Chrome
Note: Frames do not have Headtube decals. Saddle is all black with pressure relief cut-out
[/TD]
[/TR]
[TR]
[TD="colspan: 2"][/TD]
[/TR]
[/TABLE]