Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,096
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4210 Post(s)
JBone78- What filler did you use? Has a silver look in your photos, not the best choice (if this is silver) to fill large areas with a puddle. The brazing looks to be not well done, maybe a bit cold. The fluxed area didn't extend very far beyond the dent. Doesn't look like much heat extended beyond the dent also. Not sure what the "brick' is in the earlier post. A plug attempt? If so then the plug looks to be FAR too thick for the thin wall section it's on top of. Trying to match the heat sucking nature/wall/thermal mass of a plug (or lug/socket for that matter) to the tubes that join it is a good thing. Andy.