Originally Posted by
squirtdad
Nope....my bad....but looked at your picture again and it really does look like there are "shark fin thingies" right at the hypen between L and S.
but to repeat... wrong on my part. screw does need to be at the back.
If you just spun the pads upside down then the screw would be in the wrong place - which would be bad. The problem is that you have the pads on the wrong sides - swap each over to the other brake arm, tyre-guides will be down, screw at the back.
Oh - and that is a directional tyre tread - the manufacturer will almost certainly want it installed one way around. Thing is - it will almost certainly not really matter.