View Single Post
Old 09-06-13, 02:33 PM
  #2  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 15,169

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3011 Post(s)
Liked 1,336 Times in 934 Posts
Axle compatibility depends on a number of specs. First is diameter, 3/8" (or 9.5mm) and 10mm are common rear axle sizes. Then thread pitch, 24 threads per inch, 26TPI and 1mm per thread are common. Length comes into play but only has to be "long enough" and have enough of a threaded section each side. One has to compare both axles in hand and maybe with a couple of measuring tools to know for sure. Andy.
Andrew R Stewart is offline