Originally Posted by
likebike23
The clamps for the handlebars on "slingshot" stems is 22mm in my experience. You may be able to use one of your riser bars provided you can clamp it outside of the 25.4mm bulge. If you look at the original bars, there appears to be no bulge in it. If you measure it at the clamping points that will confirm if the stem clamps are 22mm. Good luck.
Yeah, it'd be 22.2 (aka 7/8") at the 2 clamping areas, which of course occur outside of the 25.4mm (aka 1") bulge. So, really, it's a stem for both, although it looks much better with a bar that's 7/8" throughout......