View Single Post
Old 12-12-13, 04:06 PM
  #12  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 11,727

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1780 Post(s)
Liked 64 Times in 49 Posts
I just got a $375 quote (unpainted) for a replacement fork from Waterford. (I'm brokering a repaint for a friend and we thought we had found that the headset stack height was 30mm, after we had sent the frame and fork off to them. Since I don't build for others we had considered Waterford building a new fork. Turns out the stack is 35mm and replacement HS options have opened up a lot).

If I were to align a fork already out of the frame i'd expect no more then $50 labor.

Shops that have experience and motivation might be able to do the aligning too, but far more claim such then actually have the skill. Good luck. Andy.
Andrew R Stewart is offline