Originally Posted by
Campag4life
Curious how you greased it George? Shimano BB's are effectively sealed. To clean regrease you have to remove the spindle from the BB and then you pretty much have to readjust preload which dictates no lateral lash and securing the left crank arm in the right position.
Post if you have any further concerns.
I just took it off the bike and greased where the spindle makes contact with the BB cups. Cleaned everything up and screwed it back together. I didn't use a torque wrench, I just screwed it on as far as I could and used the bb wrench to tighten it a little more, not a lot.