I meant if you can't make the slotted dropouts the Paragon ones for $70 don't have the material to attach to the wood unless you think a single bolt will do for each tab.
Many of your other component choices won't work as the sizes are not compatible.
I think your seat tube is 31.8 outside diameter so the inside is probably 27.0 potentially needing to be reamed to 27.2. The seatpost and the collar won't work.
Are the wheels disc compatible? Probably not. Not sure about your rear dropout spacing either when it comes to the final wheelset choice.
The headtube still needs to be machined to accept a headset.
You have listed a three ring crank with just a 2x10 shifter..
Lots of research needed before you finalize everything..
Last edited by Canaboo; 02-14-14 at 03:05 PM.