Thread: Botton bracket
View Single Post
Old 04-29-14 | 07:22 AM
  #3  
Andrew R Stewart's Avatar
Andrew R Stewart
Senior Member
Titanium Club Membership
10 Anniversary
 
Joined: Feb 2012
Posts: 19,349
Likes: 5,466
From: Rochester, NY

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Looks to be a classic Campy NR BB, but with the cups in the opposite sides (as it's an Ital. thread both sides are RH threaded). If the adjustable cup won/t spin out using the SP-green pin tool then remove the "fixed" side with a proper 36mm boxed end spanner that's held on the cup with washers and the crank arm bolt (to prevent slipping). then once the fixed cup is off you can use a Sheldon Brown method to remove the adjustable cup. Andy.
Andrew R Stewart is offline  
Reply